[NSRCA-discussion] Robart air can leak

[Jay Marshall]

Solder won't work for sure - you can't solder AL.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Kane
Sent: Sunday, April 30, 2006 8:08 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Robart air can leak

That's what I thought, solder is not going to work.
Try the JB Weld, or the special bubble gum Mike
mentioned ;)

--- Ken Thompson <mrandmrst at comcast.net> wrote:

> It's made of aluminum, I've already scuffed the
> area, I will get the JB for 
> aluminum and try it out.  I'll just test it out real
> good before I 
> re-install it.
> 
> I also got a hint of using Hubba Bubba bubble gum,
> that sounds like a tasty 
> attempt also.
> 
> Ken
> ----- Original Message ----- 
> From: "Bob Kane" <getterflash at yahoo.com>
> To: "NSRCA Mailing List"
> <nsrca-discussion at lists.nsrca.org>
> Sent: Saturday, April 29, 2006 9:36 PM
> Subject: Re: [NSRCA-discussion] Robart air can leak
> 
> 
> > What is the can made of?  I think JB Weld would
> work
> > if you get the area clean.
> >
> > --- Ken Thompson <mrandmrst at comcast.net> wrote:
> >
> >> Does anybody have any clue how I can repair a
> >> pinhole leak in a Robart air cylinder?
> >>
> >> For some reason there is a tiny leak in the side
> of
> >> the can.  Solder and silver solder won't hold
> >> pressure.  I thought about JB weld for aluminum,
> but
> >> I'm not sure that will hold 80 to 100 PSI either.
> >>
> >> Any hints would be helpful, TIA.
> >>
> >> Ken>
> _______________________________________________
> >> NSRCA-discussion mailing list
> >> NSRCA-discussion at lists.nsrca.org
> >>
> >
>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> >
> > Bob Kane
> > getterflash at yahoo.com
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> >
>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 


Bob Kane
getterflash at yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion