[NSRCA-discussion] Brio 10-Again

[Steven Maxwell]

I've got 6 flights on mine 10-20 MPH winds and it's very solid, waiting to get some real trimming done in less wind. Set-up as follows.
Hacker A30-16m
CC P-35
Tp 2100 3 cell
4-S75
Apc 11x7 e amps 34.7 380 watts
APC 10X7 e 30.5 Amps needed more throttle by quite a bit 330 watts
APc 12X6 36.5 amps didn't fly yet
AUW 31.7
Made new standouts for motor from carbon hollow rod just big enough for 4-40 saved about 8 Grams added hatch latch. Didn't like the black velcro strap replaced with better velcro. After the 6th flight started charging at 3C with TP 1010 and 210 balancer. 23 minute for 1687 MAH full charge.


Steven Maxwell


----- Original Message ----- 
From: 
To: nsrca-discussion at lists.nsrca.org
Sent: 4/26/2006 9:16:59 PM 
Subject: [NSRCA-discussion] Brio 10-Again
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060427/a9d3c91a/attachment.html