[NSRCA-discussion] DX6 mode change

Fri Apr 21 13:44:31 AKDT 2006

It would seem that , functionally, you could switch the wires on the sticks
an possibly the trims. Don’t know about the throttle ratchet.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ihncheol Park
Sent: Friday, April 21, 2006 5:07 PM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] DX6 mode change

Mike,

Horizon told me that we send the radio back to Horizon for mode change.  It
costs around $25 + shipping both ways.
It is possible to special order, but the product support could not tell us
how much.  I checked dealer website for flexequip, but could not find the
DX6.  Only the JR is showing.
I will get an update on this and post here later when the DX6 becomes
available in different mode(s).

Ihncheol Park
P & A Hobbies
1037 N. Highway 69
Frontenac, KS 66763
620-231-3772 store
  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of mike mueller
Sent: Friday, April 21, 2006 3:27 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio 10 Set up

 Great let me know. I flew Mode 2 in 2001 after a 13 year layoff. I hated
it. I'm a Mode1 guy for life. Thanks

"Park, Ihncheol" <PnAHobbies at sbcglobal.net> wrote: 
Mike,
Should I call the Spektrum?
I will give a call to Horizon on different modes.  I fly Heli in Mode 2,
Airplane in Mode 1.  I just can not change to fly planes in mode 2. Crashing
too many times in Aerofly.

I will let you know later today.

Ihncheol Park

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of mike mueller
Sent: Friday, April 21, 2006 3:04 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio 10 Set up
 I hear you on the Mode1 Ihnch. I need the same thing

"Park, Ihncheol" <PnAHobbies at sbcglobal.net> wrote: 
I am going with Six-Series with gearbox setup.  E-Flite 40Amp, TP 2100, 4x
Futaba S3110, JR 610UL. APC 12x6E.
I've tried E-Flite 480 on a Pilot Zero 10, but with 3S 2100. It was under 30
oz and flew really well.  I don't think the 1320 will do very well
I wish Spektrum comes out with Mode 1 for me.

Ihncheol Park
P & A Hobbies

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ed Alt
Sent: Friday, April 21, 2006 12:45 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio 10 Set up
I just finished setting everything up in my "minúsculo Brio".  I grudgingly
decided to use the Spektrum.  REALLY wanted to use the 10SXII or 10X, but
why buy another receiver.  I like my Spektrum for foamy work, but thinking
ahead to having to finally learn how to do useful mixes, fake a rudder DR
with a mix etc, get the switches working the way I want, I was being lazy
and wanted to avoid it.  So I finally hit the books and have it configured
right, the only important piece missing is no expo on rudder.  

I'm trying the "best recommended setup", i.e. the E-flite Park 480 1010Kv
outrunner and the E-flite 40A ESC and starting out with TP 1320's.  Bench
tests don't seem too envouraging re. how the vertical will fare with just a
1320, but we'll see.  Seems to sag fairly quickly and it might really need a
2100 pack. The weight is encouraging though and another 2 oz with a TP 2100
isn't going to matter much I guess.  I skipped their little plastic spinner
and the all-up weight with Spektrum Rx and 4 JR 281's is 28.9 oz, at the low
end of their recommended weight range of 28-34 oz.  I was suprised at how
far forward I had to put the battery to achieve a 4" starting balance point
from the LE.  It's as far forward as it can go.  Hoping to fly soon if the
weather cooperates.

BTW, has anyone using the 281 digitals noticed that they are never 'happy'?
All of mine run through this cyclic little 'blit' where they can't help but
try moving a step and then go back.  It's not an oscillation per se, there
are several seconds or more between these 'blits' and it is competely
unrelated to whether they are connected to a control surface or not and also
unrelated to battery voltage to the receiver.  Also unrelated to receiver
type or transmitter used, doing the same thing on a R955S as it does
connected to a Spektrum receiver.  No relation to lead length either. It's
just what they like to do apparently.  Anyone else seeing this?  Seems like
a deadband value issue could be involved.

Ed
----- Original Message ----- 
From: Steven <mailto:patternrules at earthlink.net>  Maxwell 
To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>  
Sent: Sunday, April 16, 2006 5:17 PM
Subject: Re: [NSRCA-discussion] Brio 10 Set up

Steven Maxwell

----- Original Message ----- 
From:  <mailto:Pattrnflyr at aol.com> 
To: nsrca-discussion at lists.nsrca.org
Sent: 4/16/2006 4:36:02 PM 
Subject: [NSRCA-discussion] Brio 10 Set up

Just wondering which motor, battery, ESC, prop to use on this aircraft.
Also I fly at 6000 msl.  Where would you buy all the accessories and
aircraft.  TIA

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _____  

Celebrate Earth Day everyday! Discover 10 things you can do to help slow
climate change. Yahoo!
<http://us.rd.yahoo.com/mail_us/taglines/earthday/*http:/earth.yahoo.com>
Earth Day _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _____  

How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone
<http://us.rd.yahoo.com/mail_us/taglines/postman8/*http:/us.rd.yahoo.com/evt
=39663/*http:/voice.yahoo.com>  call rates.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060421/cf7619be/attachment-0001.html 