JR 8611

[Grow Pattern]

There are three 8611's.

The first one is the original 8611. OK for pattern planes etc. But can 
develop wear in the top-case where it holds the pin for the second gear. 
Usually happens in IMAC type/heavy-load installations.

The second one is the same as above but JR replaces the top case for you 
with a better support bearing for the pin.

The third, and new 8611A,  is with the new case and has a stronger motor. I 
heard 300+ inch ounces.... Gazzooks!

Regards,

Eric.




----- Original Message ----- 
From: "Adam Glatt" <adam.g at sasktel.net>
To: <discussion at nsrca.org>
Sent: Sunday, September 11, 2005 10:22 AM
Subject: JR 8611


> I'm noticing that JR has upgraded the 8611 to the 8611A.  Has anyone owned 
> and flew both to compare them?
> -Adam
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.