Hard Mount???

[flyintexan at houston.rr.com]

Jim,

That would work great....provided it is big enough....just doesn't look 
tall enough in the pic....would be awesome if you could fit two of 
these side by side on top of the car...bet they're not cheap though.



later,
mark

----- Original Message -----
From: Wayne Galligan <wgalligan at goodsonacura.com>
Date: Wednesday, September 7, 2005 4:24 pm
Subject: Re: Hard Mount???

> Mark,
> 
> E-mail me off list.   e-mails to you address are getting bounced
> 
> Wayne Galligan
> wgalligan at goodsonacura.com
> 
>  ----- Original Message ----- 
>  From: Atwood, Mark 
>  To: discussion at nsrca.org 
>  Sent: Wednesday, September 07, 2005 9:49 AM
>  Subject: RE: Hard Mount???
> 
> 
>  When you say the gear life improved.could you quantify that for 
> me?  Did they last a season with the Gator and 2 with the Hyde? Or 
> was it 5 flights with one and a season with the other.   I'm just 
> looking for an order of magnitude.  
> 
>   
> 
>  -Mark
> 
>   
> 
> 
> -------------------------------------------------------------------
> -----------
> 
>  From: discussion-request at nsrca.org [mailto:discussion-
> request at nsrca.org] On Behalf Of vicenterc at comcast.net
>  Sent: Wednesday, September 07, 2005 10:37 AM
>  To: discussion at nsrca.org; discussion at nsrca.org; 
> discussion at nsrca.org; discussion at nsrca.org
>  Cc: ronlock at comcast.net; Nat Penton
>  Subject: Re: Hard Mount???
> 
>   
> 
>  Hi Ron,
> 
>   
> 
>  Very good solution.  You just added more rubber that will be 
> more effective in isolating the vibration of the engine.  It is 
> cleat to me that the amount of rubber is important.  Also, I have 
> found that the engine mounts with nose rings are more effective 
> than without nose ring.  I think the explanation is simple.  With 
> nose ring the mount could be softer ( or more rubber).  Without 
> nose ring the mount has to be stiffer and therefore is less 
> effective in isolate vibrations.  I got this experience in my old 
> Focus I.  I installed the first time the Gator mount.  I didn't 
> like the vibration levels in the airframe and the servos gears 
> life was noticeable down.  I replaced with the Hyde mount with 
> nose ring and it was the best solution to dampen the vibrations.  
> It was evident in reducing the vibration levels in the ailerons 
> (servos gears life was improved).
> 
>   
> 
>  Vicente
> 
>   
> 
>   
> 
>           .0.344 / Virus Database: 267.10.18/89 - Release Date: 
> 9/2/2005
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.