New Engine

Randall Bearden rbearden56 at earthlink.net
Thu Sep 1 18:26:57 AKDT 2005


On 8/31/05 11:05 PM, "jeffghughes at comcast.net" <jeffghughes at comcast.net>
wrote:

> It's a nice flying plane. It comes withthe wings pre sheeted. I cut out the
> ailerons and elevators smaller than plan so it's more pattern than 3D. The
> fuse is large and very light.
>  
>> -------------- Original message --------------
>> How do you like the Zafiro?  I was thinking of building one.
>> Randy
>>  
>>> -------------- Original message --------------
>>> I'm flying a Zafiro that would fly well with that engine. Also the Runaround
>>> series of planes would fly excellent at an all up weight of about 7lbs.
>>>  
>>>> -------------- Original message --------------
>>>> IMHO the excelleron90 would be too heavy fo this engine.  It would fly it,
>>>> but the vertical would be limited.  IN intermediate, you would need to rush
>>>> the one hlaf square with half roll so you would not run out of energy.
>>>>  
>>>> Randy
>>>>  
>>>>> -------------- Original message --------------
>>>>> 
>>>>>> > Just came into a NIB O.S. FS-91 II Surpass w/pump. Does anyone have a
>>>>>> > suggestion for a not-too-expensive pattern plane for this? I am
>>>>>> currently 
>>>>>> > flying a Javelin II w/O.S. FL-70.
>>>>>> > 
>>>>>> > Jay Marshall
>>>>>> > 
>>>>>> > 
>>>>>> > 
>>>>>> > =================================================
>>>>>> > To access the email archives for this list, go to
>>>>>> > http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>> > To be removed from this list, go to
>>>>>> http://www.nsrca.org/discussionA.htm
>>>>>> > and follow the instructions.
>>>>>> > 
>>>>>> > List members email returned for mailbox full will be removed from the
>>>>>> list. 
>>>>>> > 
> I have a CA Epsilon with the same engine and it has good vertical. I bought
> the kit from CA and was very happy with it, minimal construction with foam
> core wings and tail surfaces.  I did tone the size of the ailerons and
> elevators for pattern flying.  Very good rolls and and spins, tracks very nice
> and stable in the wind as well. I am running a 13 x 7 prop on 15% fuel. I made
> a pipe tunnel and use a header and pipe so the engine is very quiet. The pipe
> was purchased from Central Hobbies (where else for pattern gear).  I was
> considering going to a YS 110 but the plane and engine set up works good and
> why mess with success. No complaints. Next plane is an Eclipse, maybe electric
> power.
> 
> Randy Bearden


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050902/872d6234/attachment.html


More information about the NSRCA-discussion mailing list