Fw: Engine Thrust 0/0

George Kennie geobet at gis.net
Mon Nov 7 09:26:18 AKST 2005


Thanks Wayne,
Very good info! I have to hand it to that kid, he's one smart
son-of-a-gun.
G.

Wayne Galligan wrote:

>     Vincent, I think Chip uses about 2 degrees or as little as
> possible and then adds a throttle to rudder mix curve. Chip had an
> article on this on RcUnivrese under his
> forum.http://www.rcuniverse.com/forum/m_2454017/tm.htm Wayne G
>
>      ----- Original Message -----
>      From: vicenterc at comcast.net
>      To: NSRCA
>      Sent: Monday, November 07, 2005 8:38 AM
>      Subject: Engine Thrust 0/0
>       Finally, I had chance to read the last K-Factor
>      (October).  I read an article Practice and Trimming by
>      Scott Covey (District 7 column) and it was interesting
>      the information in regard 0/0 engine trust.  However, it
>      does gives too much details besides that the results
>      were good.  I remember checking Chip Hyde Scandalous at
>      Nats. and I don't think I could see 0/0.  At naked eye
>      it was evident that it has right thrust.  I am
>      interesting in finding real feedback from experience
>      pattern pilots using 0/0 engine thrust. Best
>      regards, Vicente Bortone
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051107/0f2788f7/attachment.html


More information about the NSRCA-discussion mailing list