removing paint overspray

[Ken Velez]

Blank  Hi Ed I use the same product that I use to clean the surface before painting, It's called Final Kleen, but I use it shortly after spraying. It might not work after 3 days but I'm thinking it might still get it out without for sure attacking the top white coat since the over spray is dusty and not a sealed coat like the top white coat. 

Ken
  ----- Original Message ----- 
  From: Ed Alt 
  To: discussion at nsrca.org 
  Sent: Tuesday, May 24, 2005 8:47 AM
  Subject: removing paint overspray


  I've got a little bit of overspray to remove and need some advice.  It's PPG concept, with basically a very, very light dusting of yellow over white.  It's only visible in good light and you can feel the roughness where the overspray is.  

  It really looks like I can just rub it out, but the question I have is with what?  I don't want to clear coat it afterwards, so I'm looking for a way to rub it out and retain the full gloss of the finish.  Also, I still want to put some graphics in the area, so I don't want to use any wax coat if at all possible.  The yellow is about 3 days into curing right now, the white is about 6 days.

  TIA!

  Ed A.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050524/84eb7936/attachment.html