YS 1.20 AC

[jjvoth]

This engine has always run very well. It sat all last year and it could be
just a lot of gunk in it.
It seems to run better as it is run more.

Jerry
----- Original Message ----- 
From: <rcaerobob at cox.net>
To: <discussion at nsrca.org>
Sent: Friday, May 20, 2005 3:40 PM
Subject: Re: Re: YS 1.20 AC


> THis wasn't the flavor of YS that needed the "regulator ballast", was
it???  Or did that come later in the design-by-trial series????
> >
> > From: "Jerry Voth" <jjvoth at mtelco.net>
> > Date: 2005/05/20 Fri PM 04:31:08 EDT
> > To: <discussion at nsrca.org>
> > Subject: Re: YS 1.20 AC
> >
> > Let me put it this way;NO!!!!
> >   ----- Original Message ----- 
> >   From: Richard Strickland
> >   To: discussion at nsrca.org
> >   Sent: Friday, May 20, 2005 3:24 PM
> >   Subject: Re: YS 1.20 AC
> >
> >
> >   Hi Jerry,
> >
> >   You might check to see if your motor mount or something else has
loosened a bit and allows some part to come in contact with something it
shouldn't--like pinching a line. Possibly look at the nose ring area and a
shift that may cause some drag.  Don't you love the intermittent mystery?!
> >
> >   Richard
> >     ----- Original Message ----- 
> >     From: jjvoth
> >     To: discussion at nsrca.org
> >     Sent: Friday, May 20, 2005 1:17 PM
> >     Subject: YS 1.20 AC
> >
> >
> >     Anyone have any ideas why this engine quits running  when exiting
the triangle loop or the full roll after the half inside loop in the Masters
pattern.
> >     I can't remember ever having this engine quit since it was new. I've
checked the fuel lines, replaced the pickup line in the tank, changed the
diaphragm, checked the fuel passages in the regulator and carb, changed
plugs, reset the idle screw and cleaned the filter. It runs fine with plenty
of power (for an AC) and it doesn't quit on the above maneuvers every time.
> >
> >     Any help would be appreciated.
> >
> >     Jerry
> >
>
> Bob Pastorello, El Reno, OK, USA
> rcaerobob at cox.net
> www.rcaerobats.net
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
list.
>
>
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.