Differential - 9CAP

[brianyemail-nsrca at yahoo.com]

Heres an interesting question/tidbit I would be
interesting in hearing comments on .

I have a 9CAP for my Impact.

I have high/low rates setup. On my high rates I use
endpoint adjustment and set differential as recomended
(and seems necessary) for the top hinged ailerons. The
differential is about 4 mm. So I flip to low rates and
I have equal throw. I figured since I set endpoints
the differential would work for the rates also, but
the linkage must work such that the differential comes
in toward the end of the throw. 

I only have one mix left and was trying to mix
differential to low rates, I can make it work on one
aileron but I think I need another mix for ch6 to get
the slave side. 

Anyone ever have this problem? 
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.