AMA ID

[Bob Pastorello]

Bill - what Brian said....
:-)

Bob
  ----- Original Message ----- 
  From: Wincons at aol.com 
  To: discussion at nsrca.org 
  Sent: Sunday, May 08, 2005 8:11 PM
  Subject: Re: AMA ID


  Section 4.7 of the Competition Rules; IDENTIFICATION: All models shall be identified by the contestants AMA license number permanently affixed to the upper side of the right hand lifting surface, or to each side of the fuselage or vertical stabilizer. The height of the numerals must be at least one (1) inch, both stroke and width to enable ready recognition.

  Section 4.8 covers borrowed models. 

  Brian

  In a message dated 5/8/2005 7:54:36 P.M. Central Daylight Time, phelps15 at comcast.net writes:
    All:
    Is there a rule about where our AMA Number is to be placed, and the size of the ID?
    Thanks
    Bill


    Bill Pritchett
    765-744-9322
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050509/5978efb2/attachment.html