Pull-Pull

[Jim Ivey]

 ED
I use the eye bolt arrangement at the servo and use the Sullivan turnbuckle assembly at the tail(rudder). The turnbuckle is small and light enough. I also put a piece of heat shrink on the turnbuckle after it is adjusted.

Jim Ivey
> 
> From: Ed Deaver <divesplat at yahoo.com>
> Date: 2005/05/08 Sun PM 08:21:26 EDT
> To: NSRCA Disscussion <discussion at nsrca.org>
> Subject: Pull-Pull
> 
> Have a question for the heavy duty pull pull users.
>  
> On my Symphony I used a 2/56 eye bolt with nut screwed into a clevis, attached to the control horn and also at the servo.  2 of these assemblies way back at the tail is actually quite a bit of weight.  I used the long Dubro black control horns screwed onto a bolt in the rudder.
>  
> My question is, Do I needthe eye bolt assembly or can you wrap the nylon coated fishing leader through the  control horn hole and crimp?  Should I go through the hole twice?
>  
> Thanx in advance.
>  
> ed
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.