Sullivan Offset Control Horns

[Keith Black]

Bob, check out the Dub-Bro Heavy Duty Control Horn, Cat. No. 867.  These are plenty long to reach the hinge line and can be cut shorter if needed. They're not the enormous Frankenstein IMAC size, just perfect for pattern IMHO.

http://www.shopatron.com/product/product_id=DUB867/101.0

I don't use the supplied 6-32 screw, I get a longer one at the hardware store. The 3/4" horn is what is valuable here. 

Keith
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: NSRCA 
  Sent: Thursday, March 31, 2005 8:02 PM
  Subject: Sullivan Offset Control Horns


  Sullivan shows an illustration of # S 566 as a 6-32 control takeoff with a LONG offset.  That p/n at Tower comes up as the small white nylon Standard offset.  ANYONE know which is right?  I'm after the long offset parts.

  Bob Pastorello
  www.rcaerobats.net
  rcaerobob at cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050401/4eeeee5c/attachment.html