6 meter interference - channel 03

[John Ferrell]

Not likely, the receiver is converting everything to pulses, even the bad 
stuff!

John Ferrell
http://DixieNC.US

----- Original Message ----- 
From: "Bill Glaze" <billglaze at triad.rr.com>
To: <discussion at nsrca.org>
Sent: Tuesday, March 22, 2005 4:08 PM
Subject: Re: 6 meter interference - channel 03


> Del: I've never had any problems at all on 6 meters anywhere, also, but am 
> wondering if it would be possible to attach a set of headphone clips 
> anywhere in one of our recenvers and listen?  We used to do that with the 
> Orbits, but they were of course super-regen front ends, and about as broad 
> as all outdoors.  And, these new recenvers may not be able to drive 
> headphones.  Takes a lot of power.
>
> Bill Glaze
>
> Del K. Rykert wrote:
>
>> Paul..
>>    Being a Ham and aware that some Hams do use the 50mhz band you may 
>> have a ham using it for digi-peating or even cw. If you really want to 
>> bother with the trouble shooting effort you can get yourself a 
>> directional 50mhz handheld antenna and track down the source. After all 
>> that effort doesn't mean it will solve your problem except to know where 
>> it was coming from. I have intenially used the 53 mhz band as over all my 
>> years of using the ham frequencies I have had many from all areas of the 
>> country and Canada have never had inference on the 53mhz portion. Was 
>> reported many had witnessed or personally experienced interference on the 
>> 50mhz portion.  Draw your own conclusions. I have chosen the 53 mhz and 
>> never looked elsewhere yet.
>>
>>    del
>>        kb2joi - gen
>>           worked  220 countries
>>                rtty / cw / ssb
>>
>> ----- Original Message ----- From: "Paul Horan" <phoran at vvm.com>
>> To: <discussion at nsrca.org>
>> Sent: Tuesday, March 22, 2005 10:30 AM
>> Subject: 6 meter interference - channel 03
>>
>>
>>>    I am getting interference on Channel 03 , 50.86  Mhz.  The 50 mhz rc 
>>> frequencies are in the CW portion 50-50.100 6meters.  My symptoms were a 
>>> few holds, plane did no fly smoothly, and 2 failsafes - low throttle.
>>> Any ideas what are the best channels on 6 meters to stay away from 
>>> interference ?  Of course, one
>>> solution is to go to the regular RC freqs.
>>>    Any ideas if this interference can be due to some other cause ?
>>> ThanksPaul Horan
>>> KC5NF
>>> AMA 57131
>>> NSRCA 3606
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.