Zen 50

[Bill Pritchett]

Ron:
If you decide to go with the Futaba servo, let me know.  I've got one you 
can have.
Bill

----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: <discussion at nsrca.org>
Sent: Monday, March 21, 2005 8:45 AM
Subject: Re: Zen 50



On Mar 21, 2005, at 4:45 AM, Wladimir Kummer de Paula wrote:

> Yesterday I got a great deal on a NIB Zen 50. The kit is very well done 
> but
> the manual is left much to be desired. There is no mention about the 
> retract
> servo to use. Could I use a standart S148 for the retracts or should I go 
> to
> the 136G? Also it seems a little on the heavy side. Which engine would be
> well suited to this airframe? I have in hand a side exhaust YS 45 and a
> Saito .72 but I´m sincerely considering a purchase of a .60 class engine

Both HiTec and GWS have retract servos that are low-profile, just like
the Futaba 136G, but a LOT less expensive.

Ron Van Putte

================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.