BRIO info.

[Grow Pattern]

Excellent Sensei!

----- Original Message ----- 
From: "Bob Kane" <getterflash at yahoo.com>
To: <discussion at nsrca.org>
Sent: Monday, March 14, 2005 5:02 PM
Subject: Re: BRIO info. 


> My next K-Factor article is largely comprised Brio
> pictures for those not online . . . .
> 
> 
> --- Grow Pattern <pattern4u at comcast.net> wrote:
>>  I posted this note and a bunch of detail pictures
>> on RCU, under the "RC 
>> pattern flying" section under "Piedmont BRIO" for
>> those of us who love to 
>> devour this stuff.
>> 
>> RC Airplanes >> 3D, IMAC and Pattern >> RC Pattern
>> Flying >> Piedmont Brio
>> 
>> Regards,
>> 
>> Eric.
>> 
>> 
>> "I was able to pour over the BRIO today, thanks to
>> some Dr. FedEx medicine 
>> :-)
>> I weighed all that was "a part" and what seemed
>> relevant to us builder 
>> types. Here you go, everything in oz's...
>> 
>> Wings
>> L = 11.3
>> R = 10 .9
>> uncut FG tube 2.1
>> 
>> Stabs
>> L = 3.0
>> R = 2.8
>> tube = 0.8
>> 
>> Fuselage containing, firewall, tunnel, u/c gear
>> formers, RUDDER 
>> pre-seam-hinged, wing tube, adjusters, servo tray,
>> tank tray, stab tube etc.
>> Fuse = 33.4
>> FG chin - 2.3
>> Molded FG canopy = 2.4
>> 
>> U/C
>> Pants = 1.8
>> legs 5.3 - All and straight - not swept.
>> 
>> Add weight of stab adjusters and rod, u/c bolts and
>> wing bolts (1/4 x 20 
>> nylon) and you can start assembling and finishing
>> it.
>> Eric. "
>> _____________________________
>> 
>> If it has wings I'll fly it....
>> eric.henderson at comcast.net
>> Home (856)988-9184 (EST) 
>> 
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
>> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>> 
>> 
> 
> Bob Kane
> getterflash at yahoo.com
> 
> 
> 
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/ 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.