Three blade size

[Wayne Galligan]

Something different.   Look like clones.    But I think for less $$
This 16x11 3 blade has good performance and is noticeably slower then the 17x12 2-blade APC.   
The 3 blade 16x11 is one ounce lighter then the 17x12 APC also.

Wayne G


  ----- Original Message ----- 
  From: Mike Hester 
  To: discussion at nsrca.org 
  Sent: Friday, June 10, 2005 3:45 PM
  Subject: Re: Three blade size


  Those look a LOT like Mejlik props, wierdly enough even the sizing is the same. What's up with that?

  Anyway I have a Mejlik 16x11 I tested yesterday. It has an extremely wide blade root and a 120 cut  TT was too small to fit. Also the hole Dia is 3/8 so a bushing would need to be used on a 140. I can say this...it's louder than the APC, but it's PERFECT in performance.

  So are these Mejlik clones or are they something different?

  -Mike
    ----- Original Message ----- 
    From: Wayne Galligan 
    To: discussion at nsrca.org 
    Sent: Friday, June 10, 2005 4:06 PM
    Subject: Re: Three blade size


    Cleveland props does make a c.fiber 16x11  and I am using one on my OS 1.40 and I like it.

    see this link:

    http://pages.prodigy.net/gcleveland_grsmodels/_import/pages.prodigy.net/gcleveland_grsmodels/index6.html

    Wayne Galligan
      ----- Original Message ----- 
      From: randy10926 at comcast.net 
      To: discussion at nsrca.org 
      Sent: Friday, June 10, 2005 3:01 PM
      Subject: Re: Three blade size


      I wish they made a 3 blade 16X11

        -------------- Original message -------------- 

        Does anyone make a three blade 16 x 10 ?

        Bob Pastorello
        www.rcaerobats.net
        rcaerobob at cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050610/3a6420b0/attachment.html