Three blade size

[Wayne Galligan]

Bob,

Try this link:
http://pages.prodigy.net/gcleveland_grsmodels/_import/pages.prodigy.net/gcleveland_grsmodels/index6.html

I am using the 16x11 c.fiber prop on my OS 1.40 in my Entropy and there is a very noticeable difference in speed
between it and a 17x12 2 blade APC.   Has real traction in the vertical too.

Wayne G.

  ----- Original Message ----- 
  From: Bob Pastorello 
  To: NSRCA 
  Sent: Thursday, June 09, 2005 9:11 PM
  Subject: Three blade size


  Does anyone make a three blade 16 x 10 ?

  Bob Pastorello
  www.rcaerobats.net
  rcaerobob at cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050610/fc3da131/attachment.html