Glow Engine Vs. Electric Engine for 2 m' pattern plane

[Jim Ivey]

  Guys
 How 'bout fiber optics cabling. It has no losses.
 See Bryan Kennedy he can fix you up.

Jim Ivey
> 
> From: "Cameron Smith" <dentdoc007 at adelphia.net>
> Date: 2005/06/02 Thu AM 08:11:07 EDT
> To: <discussion at nsrca.org>
> Subject: RE: Glow Engine Vs. Electric Engine for 2 m' pattern plane
> 
> Castle makes some really nice silicon wire! As long as you don't get the
> prop caught in it.
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Keith Hoard
> Sent: Thursday, June 02, 2005 7:32 AM
> To: discussion at nsrca.org
> Subject: RE: Glow Engine Vs. Electric Engine for 2 m' pattern plane
> 
> Has anyone figured out how long of an extension cord you would need to
> fly
> the FAI sequence?  
> 
>  
>  
> Keith L. Hoard
> Cordova, TN
> khoard at midsouth.rr.com
>  
>  
>  
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On
> Behalf Of Ken Thompson
> Sent: Thursday, June 02, 2005 5:09 AM
> To: discussion at nsrca.org
> Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane
> 
> Jerry,
> 
> I believe MaxAmps has 2250 mAh cells, when wired in 4S3P packs and using
> 2 
> in series should get you 24 cells at 6750 mAh.  That should be enough
> for 
> Masters rounds, though you will have to have a spare set while one
> charges.
> 
> Ken
> ----- Original Message ----- 
> From: "Jerry Budd" <jerry at buddengineering.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, June 01, 2005 11:28 PM
> Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane
> 
> 
> > Uh, I just checked the website and those cells are way too low of
> capacity
> 
> > to use for pattern.
> >
> > ???
> >
> > Jerry
> >
> >>Call Austin at MaxAmps.com  he has Lipos that will work..
> >>
> >>Stay tuned for my 2M electric pattern plane project..
> >>
> >>Scott Anderson
> >>NSRCA 529
> >>D3-AVP
> >
> > -- 
> > ___________
> > Jerry Budd
> > Budd Engineering
> > (661) 722-5669 Voice/Fax
> > (661) 435-0358 Cell Phone
> > mailto:jerry at buddengineering.com
> > http://www.buddengineering.com
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > List members email returned for mailbox full will be removed from the 
> > list.
> > 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the list.
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.