YS 91AC

[Jim Ivey]

Ken
June issue of Model Aviation,page 36.

YS Performance
PO Box 3146,
Gardenerville,NV.  89410
Jim Ivey

> 
> From: "Ken Thompson" <mrandmrst at comcast.net>
> Date: 2005/06/01 Wed PM 08:05:27 EDT
> To: <discussion at nsrca.org>
> Subject: YS 91AC
> 
> Hi all,
> 
> I have a YS-91AC that came in a plane I aquired last weekend.  On the 16th flight I lost the motor about 2 minutes into my routine.  After a safe, and pretty nice landing, I might add, I brought it back to the pits to see what happened.  I could turn the prop by hand with almost no back-pressure.  
> I pulled the motor out when I got home and checked it out the best I know how.  Pulling off the backplate I see the connecting rod and piston seem to be OK and the valves seem to be moving like they're supposed to.  I don't know a lot about these engines, as this is the first YS I've run in a plane. 
> 
> What I need to know is where is the best place to send the motor to be checked out and re-built.  I don't want it just patched up, I would like it done right, but a quick turn around.
> 
> Asking too much?
> 
> Thanks in advance,
> 
> Ken Thompson
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.