3 blade prop

[rcaerobob at cox.net]

Randy - what pipe, length, nitro you using?  What rpm you getting with that?

My OS's will TURN the 13 pitch, but it is a strain I don't like to put on the motor.

Bob Pastorello
> 
> From: randy10926 at comcast.net
> Date: 2005/07/11 Mon PM 03:11:37 EDT
> To: discussion at nsrca.org
> Subject: Re: 3 blade prop
> 
> I would think so.
> 
> My os160 have no problems with an APC 15.75X13 three blade.  Since I heard the pitch measure less for a Bolly than an APC, I wonder if a Bolly 18X10 would be enough prop.
> 
> Randy
> 
> -------------- Original message -------------- 
> 
> Bob
> 
> Do you think that a OS 1.60 will turn the Bolly 18x10 three blade ?
> 
> Robert
> 

Bob Pastorello, El Reno, OK, USA
rcaerobob at cox.net
www.rcaerobats.net

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.