[SPAM] JR 3421 SA servo gear replacement

[rcaerobob at cox.net]

Leave the metal output gear/bearing intact.  Replace all the others with the nylon.  Easy, breezy.
Works great, lasts a long time.
> 
> From: Rodney Tanner <rodney19821982 at yahoo.com>
> Date: 2005/07/06 Wed PM 01:54:21 EDT
> To: discussion at nsrca.org
> Subject: [SPAM] JR 3421 SA servo gear replacement
> 
>  It was mentioned here a while back that JRPSG321 gear sets can be used to replace the 3421 metal and SA nylon gears. Can anyone tell me the basic proceedure for this job. I have four 3421 servos that need new gears.
> Thanks in advance for any advice.
>  
> Rodney Tanner
> NSRCA #2906
> 
> 
>  
> 

Bob Pastorello, El Reno, OK, USA
rcaerobob at cox.net
www.rcaerobats.net

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.