[SPAM] Re: 9411SA geartrain tick

[Jim Ivey]

Ed
OK I will be listening for the answer like you.

Jim Ivey
> 
> From: "Ed  Alt" <ed_alt at hotmail.com>
> Date: 2005/07/05 Tue PM 11:50:56 EDT
> To: <discussion at nsrca.org>
> Subject: [SPAM] Re: 9411SA geartrain tick
> 
> Jim:
> This is with or without the servo arm on.
> 
> ----- Original Message ----- 
> From: "Jim Ivey" <jivey61 at bellsouth.net>
> To: <discussion at nsrca.org>
> Sent: Tuesday, July 05, 2005 10:51 PM
> Subject: Re: 9411SA geartrain tick
> 
> 
> > Ed
> > I haven't had that problem. Was that with the servo arm on and tight or 
> > was it without the servo arm. Does it stop clicking with the arm tight? 
> > That will tend to pull the output shaft up out of the servo and maybe 
> > relieve the clicking.
> >
> > Jim Ivey
> >>
> >> From: "Ed  Alt" <ed_alt at hotmail.com>
> >> Date: 2005/07/05 Tue PM 10:02:49 EDT
> >> To: <discussion at nsrca.org>
> >> Subject: 9411SA geartrain tick
> >>
> >>
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > List members email returned for mailbox full will be removed from the 
> > list.
> >
> > 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the list.
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.