Screwing Belly Pans

[Richard Strickland]

3-4 Dzus? fasteners into wire hoops(used to use 2 on the 60 sized stuff). Berry quick.

Richard S.
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: NSRCA 
  Sent: Saturday, January 29, 2005 8:41 AM
  Subject: Screwing Belly Pans


  Allrighty- here's a question for the creative types... My new Icepoint, truly a VERY high quality PARF, has the one piece wing (big, straight, light, well-covered), and it is covered with a REALLY long one-piece belly-pan/chin cowl that goes from the spinner face to the wing t.e.
      It is supposed to be held on with ten, 2mm screws....Since the wing/pipe has to come off every flying session, that's a LOT of screwing around with...

  ANYONE have any ideas for alternates?  Have considered the BVM 'canopy hooks', but not enough surface to grab everything properly.  I have about a 1/4" tall lip to hold onto from the pan.

  Please - no "That's why you buy plug-in wings, Bob" answers....

  Bob Pastorello
  NSRCA 199  AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050129/21cc64cb/attachment.html