New Dremel cordless

Fri Jan 21 12:13:12 AKST 2005

*I* thought that Ron provided the plans FOR the rocks, and did the R&D work...
> 
> From: <tony at radiosouthrc.com>
> Date: 2005/01/21 Fri PM 04:06:21 EST
> To: <discussion at nsrca.org>
> Subject: Re: Re: New Dremel cordless
> 
> Ron is OLDER than ROCKS....  (that's MUCH older than dirt!)  VBG
> 
> Tony Stillman
> Radio South
> 3702 N. Pace Blvd.
> Pensacola, FL 32505
> 1-800-962-7802
> www.radiosouthrc.com
> ----- Original Message ----- 
> From: "Wayne Galligan" <wgalligan at goodsonacura.com>
> To: <discussion at nsrca.org>
> Sent: Friday, January 21, 2005 1:19 PM
> Subject: Re: Re: New Dremel cordless
> 
> 
> > Ok....if Ron is older then dirt, then how old is he?
> >
> > WG
> >
> >
> > ----- Original Message ----- 
> > From: "Jim Ivey" <jivey61 at bellsouth.net>
> > To: <discussion at nsrca.org>
> > Sent: Friday, January 21, 2005 1:00 PM
> > Subject: Re: Re: New Dremel cordless
> >
> >
> >>
> >> > Yep dirt it was.
> >>
> >> jim Ivey
> >> > From: Ron Van Putte <vanputte at cox.net>
> >> > Date: 2005/01/21 Fri PM 01:25:33 EST
> >> > To: discussion at nsrca.org
> >> > Subject: Re: New Dremel cordless
> >> >
> >> >
> >> > On Jan 21, 2005, at 12:09 PM, Jim Ivey wrote:
> >> >
> >> > > Ron
> >> > >  I bet that tube was a RK61. I still have my whole Babcock BCR10
> >> > > system.
> >> >
> >> > I had a receiver, which had an RK61, but it never worked.  What I flew
> >> > was an ECE receiver, which had a 3D6 tube, as I remember.  I still have
> >> > it.  For you young guys:  This all happened just after dirt was
> >> > invented.
> >> >
> >> > Ron Van Putte
> >> >
> >> > > From: Ron Van Putte <vanputte at cox.net>
> >> > >> Date: 2005/01/21 Fri AM 10:48:46 EST
> >> > >> To: discussion at nsrca.org
> >> > >> Subject: Re: New Dremel cordless
> >> > >>
> >> > >>
> >> > >> On Jan 21, 2005, at 9:38 AM, <brianyemail-nsrca at yahoo.com> wrote:
> >> > >>
> >> > >>> What did you use before nicads, lead/acid?
> >> > >>
> >> > >> You're not going to believe it, but we used dry cell batteries!
> >> > >> Remember, these were/are not rechargeable, so we had to buy new ones
> >> > >> when they ran down.  When I started, I had a single tube receiver
> > with
> >> > >> 3 volt filament supply and 45 volt plate supply.  The transmitter 
> >> > >> had
> >> > >> a
> >> > >> six volt filament supply and 135 volt plate supply.  I'll bet you're
> >> > >> sorry you asked now.
> >> > >>
> >> > >> Ron Van Putte
> >> > >>
> >> > >>>
> >> > >>> Ron Van Putte <vanputte at cox.net> wrote:
> >> > >>>
> >> > >>>  On Jan 20, 2005, at 8:22 PM, Bob Pastorello wrote:
> >> > >>>
> >> > >>>> ONLY until the first one goes "poof" in the workshop and burns 
> >> > >>>> down
> >> > >>>> a
> >> > >>>> house.
> >> > >>>> But maybe they have all the safeguards in the world to prevent 
> >> > >>>> home
> >> > >>>> improvement guys from harming the batteries.
> >> > >>>>
> >> > >>>> I can tell you I won't go near one.
> >> > >>>
> >> > >>> One of the "advantages" of being in this hobby for a long time is
> >> > >>> that
> >> > >>>  you get to see a lot of things come and go. I can remember when I
> >> > >>> heard virtually the same comment about nickel cadmium batteries. I
> >> > >>> also remember a club member's airplane was blown in half when his
> > six
> >> > >>>  year old son cranked up the charge rate on his home made variable
> >> > >>>  charger and the battery pack exploded. When the average modeler
> > gets
> >> > >>>  smart about proper charging of lithium battery packs, we'll start
> >> > >>>  worrying about a new battery chemistry.
> >> > >>>
> >> > >>> Ron Van Putte
> >> > >>>
> >> > >>>> ----- Original Message -----
> >> > >>>> From: vicenterc at comcast.net
> >> > >>>> To: discussion at nsrca.org ; discussion at nsrca.org
> >> > >>>> Cc: Linda Carnes
> >> > >>>> Sent: Thursday, January 20, 2005 8:19 PM
> >> > >>>> Subject: Re: New Dremel cordless
> >> > >>>>
> >> > >>>> This is good news. As soon as the power tools start to use Li-On
> >> > >>>> the
> >> > >>>> price of the batteries is going to drop a lot.
> >> > >>>>
> >> > >>>> Vince
> >> > >>>>
> >> > >>>> -------------- Original message --------------
> >> > >>>>
> >> > >>>>> Cleaning is a good one you can get to places most tools can not.
> >> > >>>>> There is a tool for cleaning grout in tile and floors to get it
> >> > >>>> readdy to
> >> > >>>>> coat
> >> > >>>>> Sincerely
> >> > >>>>>
> >> > >>>>> Linda A. Carnes
> >> > >>>>>
> >> > >>>>> In loving memory of my Husband
> >> > >>>>> William Ross Carnes, 1954 - 2004
> >> > >>>>> ----- Original Message -----
> >> > >>>>> From: "Bill Glaze"
> >> > >>>>> To:
> >> > >>>>> Sent: Thursday, January 20, 2005 1:04 PM
> >> > >>>>> Subject: Re: New Dremel cordless
> >> > >>>>>
> >> > >>>>>
> >> > >>>>>> Linda:
> >> > >>>>>> Actually, she doesn't do nails, but keep coming up with ideas.
> >> > >>>> I'm all
> >> > >>>>>> ears. How about using the high-speed brush for getting some rust
> >> > >>>> off the
> >> > >>>>>> porch railing, and then painting with Rustoleum? If she could be
> >> > >>>>>> convinced, it'd prove to be right down her alley. Bill Glaze
> >> > >>>>>>
> >> > >>>>>> Linda Carnes wrote:
> >> > >>>>>>
> >> > >>>>>>> If she does her own acrylic nails they are great. I refuse to 
> >> > >>>>>>> go
> >> > >>>> to a
> >> > >>>>>>> salon for safety and it saves a lot of cash.
> >> > >>>>>>> Sincerely
> >> > >>>>>>>
> >> > >>>>>>> Linda A. Carnes
> >> > >>>>>>>
> >> > >>>>>>> In loving memory of my Husband
> >> > >>>>>>> William Ross Carnes, 1954 - 2004
> >> > >>>>>>> ----- Original Message ----- From: "Bill Glaze"
> >> > >>>>>>> To:
> >> > >>>>>>> Sent: Thursday, January 20, 2005 9:35 AM
> >> > >>>>>>> Subject: Re: New Dremel cordless
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>>> Bob:
> >> > >>>>>>>> I've got one of these new Dremels too--wife got it for me as a
> >> > >>>> Christmas
> >> > >>>>>>>> present--I agree with your assesment. Great addition to the
> >> > >>>> workbench.
> >> > >>>>>>>> Now if I can just convince my wife that she can use it too for
> >> > >>>> household
> >> > >>>>>>>> chores..................Bill Glaze
> >> > >>>>>>>>
> >> > >>>>>>>> Bob Kane wrote:
> >> > >>>>>>>>
> >> > >>>>>>>>> I picked up a new Dremel Li-Ion cordless rotory tool
> >> > >>>>>>>>> last night while browsing at the local Meijers store.
> >> > >>>>>>>>> This thing is great, the power and speed of a corded
> >> > >>>>>>>>> tool in a cordless. Variable speed up to 35,000 RPM,
> >> > >>>>>>>>> battery charge indicator, just way too cool. Ok,
> >> > >>>>>>>>> enough time readind email, must be something I can
> >> > >>>>>>>>> grind/sand/drill/mill/cut . . . . . . . . ;)
> >> > >>>>>>>>>
> >> > >>>>>>>>> =====
> >> > >>>>>>>>> Bob Kane
> >> > >>>>>>>>> getterflash at yahoo.com
> >> > >>>>>>>>>
> >> > >>>>>>>>>
> >> > >>>>>>>>> __________________________________ Do you Yahoo!? All your
> >> > >>>> favorites on
> >> > >>>>>>>>> one personal page ? Try My Yahoo!
> >> > >>>>>>>>> http://my.yahoo.com
> >> > >>>> =================================================
> >> > >>>>>>>>> To access the email archives for this list, go to
> >> > >>>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > >>>>>>>>> To be removed from this list, go to
> >> > >>>>>>>>> http://www.nsrca.org/discussionA.htm
> >> > >>>>>>>>> and follow the instructions.
> >> > >>>>>>>>>
> >> > >>>>>>>>>
> >> > >>>>>>>>>
> >> > >>>>>>>>>
> >> > >>>>>>>>
> >> > >>>>>>>> =================================================
> >> > >>>>>>>> To access the email archives for this list, go to
> >> > >>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > >>>>>>>> To be removed from this list, go to
> >> > >>>> http://www.nsrca.org/discussionA.htm
> >> > >>>>>>>> and follow the instructions.
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>> =================================================
> >> > >>>>>>> To access the email archives for this list, go to
> >> > >>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > >>>>>>> To be removed from this list, go to
> >> > >>>> http://www.nsrca.org/discussionA.htm
> >> > >>>>>>> and follow the instructions.
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>
> >> > >>>>>> =================================================
> >> > >>>>>> To access the email archives for this list, go to
> >> > >>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > >>>>>> To be removed from this list, go to
> >> > >>>> http://www.nsrca.org/discussionA.htm
> >> > >>>>>> and follow the instructions.
> >> > >>>>>
> >> > >>>>> =================================================
> >> > >>>>> To access the email archives for this list, go to
> >> > >>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > >>>>> To be removed from this list, go to
> >> > >>>> http://www.nsrca.org/discussionA.htm
> >> > >>>>> and follow the instructions.
> >> > >>>>>
> >> > >>
> >> > >>
> >> > >
> >> > >
> >> > > =================================================
> >> > > To access the email archives for this list, go to
> >> > > http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > > To be removed from this list, go to
> >> > > http://www.nsrca.org/discussionA.htm
> >> > > and follow the instructions.
> >> > >
> >> >
> >> > ================================================To access the email
> > archives for this list, go to
> >> > http://lists.f3a.us/pipermail/nsrca-discussion/
> >> > To be removed from this list, go to 
> >> > http://www.nsrca.org/discussionA.htm
> >> > and follow the instructions.
> >> >
> >> >
> >>
> >>
> >> =================================================
> >> To access the email archives for this list, go to
> >> http://lists.f3a.us/pipermail/nsrca-discussion/
> >> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> >> and follow the instructions.
> >>
> >>
> >
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 

Bob Pastorello, El Reno, OK, USA
rcaerobob at cox.net
www.rcaerobats.net

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.