New Dremel cordless

tony at radiosouthrc.com tony at radiosouthrc.com
Fri Jan 21 12:06:39 AKST 2005 

Ron is OLDER than ROCKS....  (that's MUCH older than dirt!)  VBG

Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
----- Original Message ----- 
From: "Wayne Galligan" <wgalligan at goodsonacura.com>
To: <discussion at nsrca.org>
Sent: Friday, January 21, 2005 1:19 PM
Subject: Re: Re: New Dremel cordless


> Ok....if Ron is older then dirt, then how old is he?
>
> WG
>
>
> ----- Original Message ----- 
> From: "Jim Ivey" <jivey61 at bellsouth.net>
> To: <discussion at nsrca.org>
> Sent: Friday, January 21, 2005 1:00 PM
> Subject: Re: Re: New Dremel cordless
>
>
>>
>> > Yep dirt it was.
>>
>> jim Ivey
>> > From: Ron Van Putte <vanputte at cox.net>
>> > Date: 2005/01/21 Fri PM 01:25:33 EST
>> > To: discussion at nsrca.org
>> > Subject: Re: New Dremel cordless
>> >
>> >
>> > On Jan 21, 2005, at 12:09 PM, Jim Ivey wrote:
>> >
>> > > Ron
>> > >  I bet that tube was a RK61. I still have my whole Babcock BCR10
>> > > system.
>> >
>> > I had a receiver, which had an RK61, but it never worked.  What I flew
>> > was an ECE receiver, which had a 3D6 tube, as I remember.  I still have
>> > it.  For you young guys:  This all happened just after dirt was
>> > invented.
>> >
>> > Ron Van Putte
>> >
>> > > From: Ron Van Putte <vanputte at cox.net>
>> > >> Date: 2005/01/21 Fri AM 10:48:46 EST
>> > >> To: discussion at nsrca.org
>> > >> Subject: Re: New Dremel cordless
>> > >>
>> > >>
>> > >> On Jan 21, 2005, at 9:38 AM, <brianyemail-nsrca at yahoo.com> wrote:
>> > >>
>> > >>> What did you use before nicads, lead/acid?
>> > >>
>> > >> You're not going to believe it, but we used dry cell batteries!
>> > >> Remember, these were/are not rechargeable, so we had to buy new ones
>> > >> when they ran down.  When I started, I had a single tube receiver
> with
>> > >> 3 volt filament supply and 45 volt plate supply.  The transmitter 
>> > >> had
>> > >> a
>> > >> six volt filament supply and 135 volt plate supply.  I'll bet you're
>> > >> sorry you asked now.
>> > >>
>> > >> Ron Van Putte
>> > >>
>> > >>>
>> > >>> Ron Van Putte <vanputte at cox.net> wrote:
>> > >>>
>> > >>>  On Jan 20, 2005, at 8:22 PM, Bob Pastorello wrote:
>> > >>>
>> > >>>> ONLY until the first one goes "poof" in the workshop and burns 
>> > >>>> down
>> > >>>> a
>> > >>>> house.
>> > >>>> But maybe they have all the safeguards in the world to prevent 
>> > >>>> home
>> > >>>> improvement guys from harming the batteries.
>> > >>>>
>> > >>>> I can tell you I won't go near one.
>> > >>>
>> > >>> One of the "advantages" of being in this hobby for a long time is
>> > >>> that
>> > >>>  you get to see a lot of things come and go. I can remember when I
>> > >>> heard virtually the same comment about nickel cadmium batteries. I
>> > >>> also remember a club member's airplane was blown in half when his
> six
>> > >>>  year old son cranked up the charge rate on his home made variable
>> > >>>  charger and the battery pack exploded. When the average modeler
> gets
>> > >>>  smart about proper charging of lithium battery packs, we'll start
>> > >>>  worrying about a new battery chemistry.
>> > >>>
>> > >>> Ron Van Putte
>> > >>>
>> > >>>> ----- Original Message -----
>> > >>>> From: vicenterc at comcast.net
>> > >>>> To: discussion at nsrca.org ; discussion at nsrca.org
>> > >>>> Cc: Linda Carnes
>> > >>>> Sent: Thursday, January 20, 2005 8:19 PM
>> > >>>> Subject: Re: New Dremel cordless
>> > >>>>
>> > >>>> This is good news. As soon as the power tools start to use Li-On
>> > >>>> the
>> > >>>> price of the batteries is going to drop a lot.
>> > >>>>
>> > >>>> Vince
>> > >>>>
>> > >>>> -------------- Original message --------------
>> > >>>>
>> > >>>>> Cleaning is a good one you can get to places most tools can not.
>> > >>>>> There is a tool for cleaning grout in tile and floors to get it
>> > >>>> readdy to
>> > >>>>> coat
>> > >>>>> Sincerely
>> > >>>>>
>> > >>>>> Linda A. Carnes
>> > >>>>>
>> > >>>>> In loving memory of my Husband
>> > >>>>> William Ross Carnes, 1954 - 2004
>> > >>>>> ----- Original Message -----
>> > >>>>> From: "Bill Glaze"
>> > >>>>> To:
>> > >>>>> Sent: Thursday, January 20, 2005 1:04 PM
>> > >>>>> Subject: Re: New Dremel cordless
>> > >>>>>
>> > >>>>>
>> > >>>>>> Linda:
>> > >>>>>> Actually, she doesn't do nails, but keep coming up with ideas.
>> > >>>> I'm all
>> > >>>>>> ears. How about using the high-speed brush for getting some rust
>> > >>>> off the
>> > >>>>>> porch railing, and then painting with Rustoleum? If she could be
>> > >>>>>> convinced, it'd prove to be right down her alley. Bill Glaze
>> > >>>>>>
>> > >>>>>> Linda Carnes wrote:
>> > >>>>>>
>> > >>>>>>> If she does her own acrylic nails they are great. I refuse to 
>> > >>>>>>> go
>> > >>>> to a
>> > >>>>>>> salon for safety and it saves a lot of cash.
>> > >>>>>>> Sincerely
>> > >>>>>>>
>> > >>>>>>> Linda A. Carnes
>> > >>>>>>>
>> > >>>>>>> In loving memory of my Husband
>> > >>>>>>> William Ross Carnes, 1954 - 2004
>> > >>>>>>> ----- Original Message ----- From: "Bill Glaze"
>> > >>>>>>> To:
>> > >>>>>>> Sent: Thursday, January 20, 2005 9:35 AM
>> > >>>>>>> Subject: Re: New Dremel cordless
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>>> Bob:
>> > >>>>>>>> I've got one of these new Dremels too--wife got it for me as a
>> > >>>> Christmas
>> > >>>>>>>> present--I agree with your assesment. Great addition to the
>> > >>>> workbench.
>> > >>>>>>>> Now if I can just convince my wife that she can use it too for
>> > >>>> household
>> > >>>>>>>> chores..................Bill Glaze
>> > >>>>>>>>
>> > >>>>>>>> Bob Kane wrote:
>> > >>>>>>>>
>> > >>>>>>>>> I picked up a new Dremel Li-Ion cordless rotory tool
>> > >>>>>>>>> last night while browsing at the local Meijers store.
>> > >>>>>>>>> This thing is great, the power and speed of a corded
>> > >>>>>>>>> tool in a cordless. Variable speed up to 35,000 RPM,
>> > >>>>>>>>> battery charge indicator, just way too cool. Ok,
>> > >>>>>>>>> enough time readind email, must be something I can
>> > >>>>>>>>> grind/sand/drill/mill/cut . . . . . . . . ;)
>> > >>>>>>>>>
>> > >>>>>>>>> =====
>> > >>>>>>>>> Bob Kane
>> > >>>>>>>>> getterflash at yahoo.com
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> __________________________________ Do you Yahoo!? All your
>> > >>>> favorites on
>> > >>>>>>>>> one personal page ? Try My Yahoo!
>> > >>>>>>>>> http://my.yahoo.com
>> > >>>> =================================================
>> > >>>>>>>>> To access the email archives for this list, go to
>> > >>>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> > >>>>>>>>> To be removed from this list, go to
>> > >>>>>>>>> http://www.nsrca.org/discussionA.htm
>> > >>>>>>>>> and follow the instructions.
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>
>> > >>>>>>>> =================================================
>> > >>>>>>>> To access the email archives for this list, go to
>> > >>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> > >>>>>>>> To be removed from this list, go to
>> > >>>> http://www.nsrca.org/discussionA.htm
>> > >>>>>>>> and follow the instructions.
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>> =================================================
>> > >>>>>>> To access the email archives for this list, go to
>> > >>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> > >>>>>>> To be removed from this list, go to
>> > >>>> http://www.nsrca.org/discussionA.htm
>> > >>>>>>> and follow the instructions.
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>
>> > >>>>>> =================================================
>> > >>>>>> To access the email archives for this list, go to
>> > >>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> > >>>>>> To be removed from this list, go to
>> > >>>> http://www.nsrca.org/discussionA.htm
>> > >>>>>> and follow the instructions.
>> > >>>>>
>> > >>>>> =================================================
>> > >>>>> To access the email archives for this list, go to
>> > >>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> > >>>>> To be removed from this list, go to
>> > >>>> http://www.nsrca.org/discussionA.htm
>> > >>>>> and follow the instructions.
>> > >>>>>
>> > >>
>> > >>
>> > >
>> > >
>> > > =================================================
>> > > To access the email archives for this list, go to
>> > > http://lists.f3a.us/pipermail/nsrca-discussion/
>> > > To be removed from this list, go to
>> > > http://www.nsrca.org/discussionA.htm
>> > > and follow the instructions.
>> > >
>> >
>> > ================================================To access the email
> archives for this list, go to
>> > http://lists.f3a.us/pipermail/nsrca-discussion/
>> > To be removed from this list, go to 
>> > http://www.nsrca.org/discussionA.htm
>> > and follow the instructions.
>> >
>> >
>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

More information about the NSRCA-discussion mailing list