"Building a Pattern Airplane" book

Wed Jan 19 20:26:26 AKST 2005

That would be great. I learned alot from those columns.
----- Original Message ----- 
From: "Dwayne & Nancy" <dwaynenancy at cox.net>
To: <discussion at nsrca.org>
Sent: Wednesday, January 19, 2005 9:48 PM
Subject: RE: "Building a Pattern Airplane" book

>I wish Dean Pappas would put his Flying Models columns into book form
> for those of us who don't have a copy of ALL of his writings.  Dwayne
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of spbyrum
> Sent: Wednesday, January 19, 2005 10:04 PM
> To: discussion at nsrca.org
> Subject: RE: "Building a Pattern Airplane" book
> 
> Keith
> 
> Am I the only one who pick up that you're volunteering to allow these
> guys to professionally build your plane for free????
> 
> Steve Byrum 
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Keith Hoard
> Sent: Wednesday, January 19, 2005 4:30 PM
> To: discussion at nsrca.org
> Subject: RE: "Building a Pattern Airplane" book
> 
> I have a pattern kit and all the pieces in my garage ready to go. . . In
> case these guys need an airplane to use as a "demonstration" model. . .
> 
> 
> 
> Keith L. Hoard
> Cordova, TN
> khoard at midsouth.rr.com
> 
> 
> 
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On
> Behalf Of S & A North
> Sent: Wednesday, January 19, 2005 4:27 PM
> To: discussion at nsrca.org
> Subject: Re: "Building a Pattern Airplane" book
> 
> I agree too  excellent stuff,put it in print!
> ----- Original Message ----- 
> From: "Bill Glaze" <billglaze at triad.rr.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, January 19, 2005 4:12 PM
> Subject: Re: "Building a Pattern Airplane" book
> 
> 
>> While I would buy a copy of Thompson/Atwoods  book in any format, we
> may
>> now have a new, complementary  source for this valuable information;
>> I'm speaking, of course, of the new consortium, known as the
>> Brammer/Brox Brain Trust.
>> Sure would be a blockbuster combination.  Maybe we could shame
> them<BG>
>> into compiling their ideas and transforming them into print.  Any
>> seconds out there?
>>
>> Bill Glaze
>>
>> Del Rykert wrote:
>>
>> > Does anyone know what happened with this or what the status of it
> is?
>> > With us wanting to address new pattern fliers I found the book very
>> > worthwhile.
>> >
>> >                             del
>> >               NSRCA - 473
>> >
>> > Sent: Wednesday, January 07, 2004 11:26 AM
>> > Subject: Re: "Building a Pattern Airplane" book
>> >
>> >
>> >> Don,
>> >> Understand.  I have had some experience turning documents into
> PDFs,
>> >> so if I can be of help, let me know.
>> >>
>> >> I also understand the distribution control problem with electronic
>> >> media and copyright concerns.  Almost any printed document can be
>> >> turned into a PDF nowdays with just a cheap scanner and
>> >> shareware/freeware software if no electronic copy exists and
> someone
>> >> is so inclined.
>> >>
>> >> Assuming the docuemnt exists in some electronic format, many people
>> >> are going to "print on demand books", just printing a copy on a
> cheap
>> >> laser printer and using relatively cheap plastic binders.  This way
>> >> you beat high printing costs and minimum quantities.  The trick is
> to
>> >> balance the value to you so you get paid for all your work, and
> still
>> >> make it inexpensive enough that it is not worth someone's time to
> go
>> >> around your copyright.  Frankly though, a PDF is invaluable to some
>> >> of us since we can have it with us on a laptop, and print out
>> >> sections if we need them for a project.
>> >>
>> >> Again, if I can be of help, let me know.  I'm still interested in
>> >> buying someone's extra copy if they have it, or even just borrowing
> a
>> >> copy to read.
>> >>
>> >> Jon Lowe
>> >>
>> >> In a message dated 1/7/2004 10:36:01 AM Eastern Standard Time,
>> >> AtwoodDon writes:
>> >>
>> >>> In a message dated 1/7/2004 4:31:03 AM Pacific Standard Time,
>> >>> drykert at rochester.rr.com writes:
>> >>> Jon..
>> >>>
>> >>>     There had been a comment about getting publishers permission
> to
>> >>> put it
>> >>> up on the NSRCA web site. I don't know if that went any further
> than
>> >>> that
>> >>> though.. A comment?..
>> >>>     It was a great help for pilots entering pattern. Many have
> sworn
>> >>> by it
>> >>> usefulness especially for those of us in the pockets with little
> or no
>> >>> activity. It saved my bacon a few times.
>> >>> I am working with Bruce Thompson to see if we can adapt this to an
>> >>> Adobe PDF format for distribution.  Please be patient, we had
>> >>> basically shelved the publication, all copies gone, and are now
>> >>> working thru the considerations of what will be required to
> control
>> >>> the distribution electronically.
>> >>>
>> >>> Best bet for the interim is borrow a copy from a friend until we
>> >>> reach a decision as to how to manage the electronic
>> >>> distribution issues.
>> >>>
>> >>> Thanks for your patience.
>> >>>
>> >>> Don Atwood
>> >>
>> >>
>> > =================================================
>> > To access the email archives for this list, go to
>> > http://lists.f3a.us/pipermail/nsrca-discussion/
>> > To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> > and follow the instructions.
>> >
>> >
>> >
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.7.0 - Release Date: 1/17/2005
> 
>

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.0 - Release Date: 1/17/2005

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.