"Building a Pattern Airplane" book

Wed Jan 19 18:20:15 AKST 2005

 See keith your trying to be nice and they are taking advantage already. I'm not telling anybody I'm building a pattern plane.
hehe

Jim Ivey
> 
> From: "Keith Hoard" <khoard at midsouth.rr.com>
> Date: 2005/01/19 Wed PM 10:08:34 EST
> To: <discussion at nsrca.org>
> Subject: RE: "Building a Pattern Airplane" book
> 
> Steve,
> 
> 	I'm just volunteering to be helpful to the pattern community!!!  
> 
> 
> Keith L. Hoard
> Cordova, TN
> khoard at midsouth.rr.com
> 
> 
> 
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
> Behalf Of spbyrum
> Sent: Wednesday, January 19, 2005 9:04 PM
> To: discussion at nsrca.org
> Subject: RE: "Building a Pattern Airplane" book
> 
> Keith
> 
> Am I the only one who pick up that you're volunteering to allow these
> guys to professionally build your plane for free????
> 
> Steve Byrum 
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Keith Hoard
> Sent: Wednesday, January 19, 2005 4:30 PM
> To: discussion at nsrca.org
> Subject: RE: "Building a Pattern Airplane" book
> 
> I have a pattern kit and all the pieces in my garage ready to go. . . In
> case these guys need an airplane to use as a "demonstration" model. . .
> 
> 
> 
> Keith L. Hoard
> Cordova, TN
> khoard at midsouth.rr.com
> 
> 
> 
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On
> Behalf Of S & A North
> Sent: Wednesday, January 19, 2005 4:27 PM
> To: discussion at nsrca.org
> Subject: Re: "Building a Pattern Airplane" book
> 
> I agree too  excellent stuff,put it in print!
> ----- Original Message ----- 
> From: "Bill Glaze" <billglaze at triad.rr.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, January 19, 2005 4:12 PM
> Subject: Re: "Building a Pattern Airplane" book
> 
> 
> > While I would buy a copy of Thompson/Atwoods  book in any format, we
> may
> > now have a new, complementary  source for this valuable information;
> > I'm speaking, of course, of the new consortium, known as the
> > Brammer/Brox Brain Trust.
> > Sure would be a blockbuster combination.  Maybe we could shame
> them<BG>
> > into compiling their ideas and transforming them into print.  Any
> > seconds out there?
> >
> > Bill Glaze
> >
> > Del Rykert wrote:
> >
> > > Does anyone know what happened with this or what the status of it
> is?
> > > With us wanting to address new pattern fliers I found the book very
> > > worthwhile.
> > >
> > >                             del
> > >               NSRCA - 473
> > >
> > > Sent: Wednesday, January 07, 2004 11:26 AM
> > > Subject: Re: "Building a Pattern Airplane" book
> > >
> > >
> > >> Don,
> > >> Understand.  I have had some experience turning documents into
> PDFs,
> > >> so if I can be of help, let me know.
> > >>
> > >> I also understand the distribution control problem with electronic
> > >> media and copyright concerns.  Almost any printed document can be
> > >> turned into a PDF nowdays with just a cheap scanner and
> > >> shareware/freeware software if no electronic copy exists and
> someone
> > >> is so inclined.
> > >>
> > >> Assuming the docuemnt exists in some electronic format, many people
> > >> are going to "print on demand books", just printing a copy on a
> cheap
> > >> laser printer and using relatively cheap plastic binders.  This way
> > >> you beat high printing costs and minimum quantities.  The trick is
> to
> > >> balance the value to you so you get paid for all your work, and
> still
> > >> make it inexpensive enough that it is not worth someone's time to
> go
> > >> around your copyright.  Frankly though, a PDF is invaluable to some
> > >> of us since we can have it with us on a laptop, and print out
> > >> sections if we need them for a project.
> > >>
> > >> Again, if I can be of help, let me know.  I'm still interested in
> > >> buying someone's extra copy if they have it, or even just borrowing
> a
> > >> copy to read.
> > >>
> > >> Jon Lowe
> > >>
> > >> In a message dated 1/7/2004 10:36:01 AM Eastern Standard Time,
> > >> AtwoodDon writes:
> > >>
> > >>> In a message dated 1/7/2004 4:31:03 AM Pacific Standard Time,
> > >>> drykert at rochester.rr.com writes:
> > >>> Jon..
> > >>>
> > >>>     There had been a comment about getting publishers permission
> to
> > >>> put it
> > >>> up on the NSRCA web site. I don't know if that went any further
> than
> > >>> that
> > >>> though.. A comment?..
> > >>>     It was a great help for pilots entering pattern. Many have
> sworn
> > >>> by it
> > >>> usefulness especially for those of us in the pockets with little
> or no
> > >>> activity. It saved my bacon a few times.
> > >>> I am working with Bruce Thompson to see if we can adapt this to an
> > >>> Adobe PDF format for distribution.  Please be patient, we had
> > >>> basically shelved the publication, all copies gone, and are now
> > >>> working thru the considerations of what will be required to
> control
> > >>> the distribution electronically.
> > >>>
> > >>> Best bet for the interim is borrow a copy from a friend until we
> > >>> reach a decision as to how to manage the electronic
> > >>> distribution issues.
> > >>>
> > >>> Thanks for your patience.
> > >>>
> > >>> Don Atwood
> > >>
> > >>
> > > =================================================
> > > To access the email archives for this list, go to
> > > http://lists.f3a.us/pipermail/nsrca-discussion/
> > > To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> > > and follow the instructions.
> > >
> > >
> > >
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.