"Building a Pattern Airplane" book

[Ron Van Putte]

On Jan 19, 2005, at 9:08 PM, Keith Hoard wrote:

> I'm just volunteering to be helpful to the pattern community!!!

Well, I'll see you one and raise you one.  I have two kits that I 
volunteer to be professionally built.  I'm so motivated that I'd even 
buy a couple just to help out

Ron Van Putte

> -----Original Message-----
> From: discussion-request at nsrca.org 
> [mailto:discussion-request at nsrca.org] On
> Behalf Of spbyrum
> Sent: Wednesday, January 19, 2005 9:04 PM
> To: discussion at nsrca.org
> Subject: RE: "Building a Pattern Airplane" book
>
> Keith
>
> Am I the only one who pick up that you're volunteering to allow these
> guys to professionally build your plane for free????
>
> Steve Byrum
>
> -----Original Message-----
> From: discussion-request at nsrca.org 
> [mailto:discussion-request at nsrca.org]
> On Behalf Of Keith Hoard
> Sent: Wednesday, January 19, 2005 4:30 PM
> To: discussion at nsrca.org
> Subject: RE: "Building a Pattern Airplane" book
>
> I have a pattern kit and all the pieces in my garage ready to go. . . 
> In
> case these guys need an airplane to use as a "demonstration" model. . .
>
> Keith L. Hoard
> Cordova, TN
> khoard at midsouth.rr.com
>
>
>
>
> -----Original Message-----
> From: discussion-request at nsrca.org 
> [mailto:discussion-request at nsrca.org]
> On
> Behalf Of S & A North
> Sent: Wednesday, January 19, 2005 4:27 PM
> To: discussion at nsrca.org
> Subject: Re: "Building a Pattern Airplane" book
>
> I agree too  excellent stuff,put it in print!
> ----- Original Message -----
> From: "Bill Glaze" <billglaze at triad.rr.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, January 19, 2005 4:12 PM
> Subject: Re: "Building a Pattern Airplane" book
>
>
>> While I would buy a copy of Thompson/Atwoods  book in any format, we
> may
>> now have a new, complementary  source for this valuable information;
>> I'm speaking, of course, of the new consortium, known as the
>> Brammer/Brox Brain Trust.
>> Sure would be a blockbuster combination.  Maybe we could shame
> them<BG>
>> into compiling their ideas and transforming them into print.  Any
>> seconds out there?
>>
>> Bill Glaze
>>
>> Del Rykert wrote:
>>
>>> Does anyone know what happened with this or what the status of it
> is?
>>> With us wanting to address new pattern fliers I found the book very
>>> worthwhile.
>>>
>>>                             del
>>>               NSRCA - 473
>>>
>>> Sent: Wednesday, January 07, 2004 11:26 AM
>>> Subject: Re: "Building a Pattern Airplane" book
>>>
>>>
>>>> Don,
>>>> Understand.  I have had some experience turning documents into
> PDFs,
>>>> so if I can be of help, let me know.
>>>>
>>>> I also understand the distribution control problem with electronic
>>>> media and copyright concerns.  Almost any printed document can be
>>>> turned into a PDF nowdays with just a cheap scanner and
>>>> shareware/freeware software if no electronic copy exists and
> someone
>>>> is so inclined.
>>>>
>>>> Assuming the docuemnt exists in some electronic format, many people
>>>> are going to "print on demand books", just printing a copy on a
> cheap
>>>> laser printer and using relatively cheap plastic binders.  This way
>>>> you beat high printing costs and minimum quantities.  The trick is
> to
>>>> balance the value to you so you get paid for all your work, and
> still
>>>> make it inexpensive enough that it is not worth someone's time to
> go
>>>> around your copyright.  Frankly though, a PDF is invaluable to some
>>>> of us since we can have it with us on a laptop, and print out
>>>> sections if we need them for a project.
>>>>
>>>> Again, if I can be of help, let me know.  I'm still interested in
>>>> buying someone's extra copy if they have it, or even just borrowing
> a
>>>> copy to read.
>>>>
>>>> Jon Lowe
>>>>
>>>> In a message dated 1/7/2004 10:36:01 AM Eastern Standard Time,
>>>> AtwoodDon writes:
>>>>
>>>>> In a message dated 1/7/2004 4:31:03 AM Pacific Standard Time,
>>>>> drykert at rochester.rr.com writes:
>>>>> Jon..
>>>>>
>>>>>     There had been a comment about getting publishers permission
> to
>>>>> put it
>>>>> up on the NSRCA web site. I don't know if that went any further
> than
>>>>> that
>>>>> though.. A comment?..
>>>>>     It was a great help for pilots entering pattern. Many have
> sworn
>>>>> by it
>>>>> usefulness especially for those of us in the pockets with little
> or no
>>>>> activity. It saved my bacon a few times.
>>>>> I am working with Bruce Thompson to see if we can adapt this to an
>>>>> Adobe PDF format for distribution.  Please be patient, we had
>>>>> basically shelved the publication, all copies gone, and are now
>>>>> working thru the considerations of what will be required to
> control
>>>>> the distribution electronically.
>>>>>
>>>>> Best bet for the interim is borrow a copy from a friend until we
>>>>> reach a decision as to how to manage the electronic
>>>>> distribution issues.
>>>>>
>>>>> Thanks for your patience.
>>>>>
>>>>> Don Atwood
>>>>
>>>>
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>>
>>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.