webra 145 to OS160

[Ed Alt]

Yep, not a heck of a lot of change needed that time. I really like that sody-can method though, because you can just loosen the bolts a little and slip the shims in easily to do a nice tuning job.  They don't budge after tightening down.  Must be the dried-up cola syrup or something.  My only regret is that it screws up the stealth qualities some.

Ed
  ----- Original Message ----- 
  From: Randy 
  To: discussion at nsrca.org 
  Sent: Wednesday, January 19, 2005 7:53 PM
  Subject: Re: webra 145 to OS160


  I guess that is less than one washers worth of change?

  Randy
    ----- Original Message ----- 
    From: Ed Alt 
    To: discussion at nsrca.org ; NVRC-List at yahoogroups.com 
    Sent: Wednesday, January 19, 2005 4:54 PM
    Subject: Re: webra 145 to OS160


    Depends on the prop, but I needed another couple of layers of a Pepsi can skin when I did it.

    Ed
      ----- Original Message ----- 
      From: Randy 
      To: discussion at nsrca.org ; NVRC-List at yahoogroups.com 
      Sent: Wednesday, January 19, 2005 3:36 PM
      Subject: webra 145 to OS160


      So are input on if I am going to need to change the right thrust when I change my Focus forma Webra145 to an OS160FX?

      Randy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050120/8c1e3c39/attachment.html