Aluminium spinner for Composite ARF Impact

[brianyemail-nsrca at yahoo.com]

Ive talked to Tru Turn once...they werent too interested. Custom spinner was cost prohibitive..$250 or more.
 
ES Composites has a CF spinner that is 92 mm and should be a good fit. Not sure how starter friendly they are.

humptybump at comcast.net wrote:
The largest FAI spinner that TruTurn lists is 85mm (3 3/8"). That probably wouldn't look to bad (2.5mm short on each side). They will do some custom work....May be worth a call to them.   www.truturn.com
 
John G.
 
-------------- Original message -------------- 

> 
> Does anyone know if a 90mm high quality aluminium spinner FAI style spinner 
> is available for the "IMPACT"? 
> 
> I am using DZ power so the spinner will be seeing a lot of the electric 
> starter. 
> 
> 
> Cheers, 
> 
> Peter 
> 
> 
> 
> ================================================= 
> To access the email archives for this list, go to 
> http://lists.f3a.us/pipermail/nsrca-discussion/ 
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm 
> and follow the instructions. 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050115/69065f79/attachment.html