wing construction

[Tim Taylor]

Hey Terry

When you add the balsa for the le/te of the ailerons are they already hinged? It would be the time to do it then once sanded there's no way the hinges can get out of line. The way I use to do them was to cut the core from root to tip and then add the balsa le/te of the ailerons already hinged then sheet the cores. Gave a nice hinge line and a nice spar from root to tip.
  ----- Original Message ----- 
  From: Terry Brox 
  To: discussion at nsrca.org 
  Sent: Thursday, January 13, 2005 12:44 AM
  Subject: Re: wing construction


  Thanks, Terry
    ----- Original Message ----- 
    From: Ed Alt 
    To: discussion at nsrca.org 
    Sent: Wednesday, January 12, 2005 8:54 PM
    Subject: Re: wing construction


    Awesome website!  Quite a few great ideas in there.  

    Ed
      ----- Original Message ----- 
      From: Terry Brox 
      To: discussion at nsrca.org 
      Sent: Wednesday, January 12, 2005 10:14 AM
      Subject: wing construction


      Hi All
           Joe Dunnaway and I have been working on a "how to" and thought some may find it useful. For those who had questions on wing construction, here is our website. Check it out, and Good Luck, Terry  http://www.mackrc.net/patternwings2/index.htm


--------------------------------------------------------------------------


      No virus found in this outgoing message.
      Checked by AVG Anti-Virus.
      Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/2005

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050113/fa9a7c94/attachment-0001.html