Ultracote

[Don McCullough]

I ironed Ultracoat directly to my foamy (Formosa). I used the iron was
set under 250 degrees (just below where the beads of foam start to
show). It worked out very well. 

For a look see my Formosa site at:

http://pages.sbcglobal.net/donald_mccullough/index.html


Don



-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of John Pavlick
Sent: Sunday, January 02, 2005 7:53 PM
To: discussion at nsrca.org
Subject: Ultracote

Quick question: Has anyone used Ultracote over foam? Not sheeted foam,
but
ironed right on the foam itself (or is the temp. too high to use on
foam)?
TIA

John Pavlick
http://www.idseng.com

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.