4C Pipe Question

[tony at radiosouthrc.com]

Bob:

I forgot about the threaded-in pipe....  I had lots of complaints about it breaking at the joint of the flex and the screw-in adaptor....  I would go with the 3.5cc quiet pipe and a regular header...

Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
  ----- Original Message ----- 
  From: Ken Thompson III 
  To: discussion at nsrca.org 
  Sent: Thursday, February 24, 2005 8:29 AM
  Subject: Re: 4C Pipe Question


  Bob R.,
  I think you are talking about the Macs Quiet Muffler for YS 1.20.  The Tower # for that system is LXZ588.

  Ken
    ----- Original Message ----- 
    From: Bob Richards 
    To: discussion at nsrca.org 
    Sent: Thursday, February 24, 2005 9:14 AM
    Subject: Re: 4C Pipe Question


    I remember they had a 4s muffler that threaded onto the flexible exhaust extension. Don't have a clue what the part number was, though.  I think they were intended for 4s 120s.

    Bob R.


    rcaerobob at cox.net wrote:
      Once upon a time, there was a small Mac's quiet muffler (originally designed for 2C) that a lot of guys were using on the OLD original YS 1.20's... Does anyone recall the Mac's number, or the displacement that it was intended for?

      Thanks!

      Bob Pastorello, El Reno, OK, USA
      rcaerobob at cox.net
      www.rcaerobats.net

      =================================================
      To access the email archives for this list, go to
      http://lists.f3a.us/pipermail/nsrca-discussion/
      To be removed from this list, go to http://www.nsrca.org/discussionA.htm
      and follow the instructions.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050224/517db933/attachment.html