FAI Weight Thread

Ron Van Putte vanputte at cox.net
Wed Feb 23 20:43:18 AKST 2005


On Feb 23, 2005, at 8:05 PM, Jim Ivey wrote:

>  If you go to the Dist 3 champs  and Van Putte is the CD he will weigh 
> you and measure you. Been there and had it done.  By the way I had to 
> switch to my backup because of it.

Yeah, that nasty Van Putte.  I shaved him this morning.

Ron Van Putte

>>
>> From: "Wayne Galligan" <wgalligan at goodsonacura.com>
>> Date: 2005/02/23 Wed PM 07:37:54 EST
>> To: <discussion at nsrca.org>
>> Subject: Re: FAI Weight Thread
>>
>> Matt,
>>
>> I'll bet there are more pattern planes out there over 11lbs then most 
>> would admit.  So if you don't go to the Nats what should it matter? I 
>> haven't seen the weight/2 meter rule enforced yet at a contest other 
>> then the NATS.   I'll be one to fess up that I (had) an 11+lb guppy.  
>>  I am working diligently to get it under 11lbs ONLY because there is 
>> some faint POSSIBILITY that I MIGHT get to go to the NATS this year.  
>> AND it flies better lighter.
>>
>> Wayne G.
>>   ----- Original Message -----
>>   From: Rcmaster199 at aol.com
>>   To: discussion at nsrca.org
>>   Sent: Wednesday, February 23, 2005 6:00 PM
>>   Subject: Re: FAI Weight Thread
>>
>>
>>   In a message dated 2/23/2005 6:50:57 PM Eastern Standard Time, 
>> jivey61 at bellsouth.net writes:
>>     Ken
>>     By necessity the planes will have to get bigger or they will fly 
>> like Eric says(jello on a plate). I liked that one.
>>
>>     Jim Ivey
>>   Jimmy I agree with you here. My Enigma pattern design is 11 3/4 
>> pounds and is almost 13 pounds wet. It flies like a hippo in a tuttu. 
>> The OS 160 is plenty of power but the plane simply isn't as nimble as 
>> what we are used to
>>
>>   Matt
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list