PPG K-36 Primer?

[Rcmaster199 at aol.com]

I've used anything from PPG (Concept and/or OMNI) medium reducer, to  
standard garden variety lacquer thinner from Home Depot. It all worked fine.  Also 
used OMNI fast catalyst with K36 and it worked great.
 
MattK
 
 
In a message dated 2/22/2005 11:10:07 PM Eastern Standard Time,  
geobet at gis.net writes:

Kenny,
Use 860 reducer as much as you need to get the spray  viscocity required.
G.

Ken Velez wrote:

>  Hi guys, I  just got some K-36 primer from Tony at RS but forgot to ask if
> it can  be thinned with PPG reducer. It's supposed to be mixed 5.1 ratio but
>  it seems too thick for spraying at low pressure. Anyone has tried  thinning
> it out some how. I looked at the label but it only shows the  mixing ratios.
> TIA.
>
> Ken Velez


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050223/34f6e695/attachment.html