Polyurethane Glue Solvent

[spbyrum]

Ron

I just took some of glass with MEK.  You do need to work outside with a
mask (I didn't) and it took some rubbing.  The thin part that I had wipe
up with acetone while still wet came up pretty easy.  Some globs that
had dried were going to take more work, but I think it might do the job.

Steve Byrum 

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ron Van Putte
Sent: Saturday, February 19, 2005 1:08 PM
To: discussion at nsrca.org
Subject: Polyurethane Glue Solvent

Does anyone know of a good solvent (gets the job done, but doesn't 
dissolve the surface it's on) for dried polyurethane glue?  I 
accidentally spilled Gorilla Glue on a MonoKoted wing and didn't 
discover it until the glue had dried.  I've tried several solvents 
without success.  Help!

Ron Van Putte

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.




=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.