Belly Pan - Icepoint Style

[Jim Ivey]

Ron
He's DA BOSS.

Jim Ivey
> 
> From: Ron Van Putte <vanputte at cox.net>
> Date: 2005/02/18 Fri AM 09:29:57 EST
> To: discussion at nsrca.org
> Subject: Re: Belly Pan - Icepoint Style
> 
> 
> On Feb 17, 2005, at 11:02 PM, Ed Hartley wrote:
> 
> > Along with Bob's suggestion you may want to consider this. I use tabs 
> > similar to Bob but use 4-40 blind mounting nuts. On the 4-40 screw I 
> > use a roofing nail washer which are available at Home Depot, key word 
> > "cheap". I would suggest you take a 4-40 screw with you and get the 
> > smallest size washer. These washers are convex and have a piece of 
> > rubber glued to them. I find this system works great on any fiber 
> > glass, wood or the junk plastic which comes with some kits. So far, 
> > over a period of several years I have yet to have a crack in any of 
> > the mentioned materials where the bolt hole is located.
> 
> Aside from admiring Ed's idea, another thought kept crashing around in 
> my brain, "How did Ed get a photo on the NSRCA Discussion List?"  Come 
> on Ed, fess up.
> 
> Ron Van Putte
> 
> > ----- Original Message -----
> >  From: Bob Pastorello
> > To: NSRCA
> > Sent: Thursday, February 17, 2005 8:54 PM
> > Subject: Belly Pan - Icepoint Style
> >
> > Many of you offerred much-needed ideas on the solution to a 10-screw 
> > nightmare.  Here's the best I could do...thanks to those who made this 
> > a reality....now we'll see if it will WORK.
> >     This was the last step before balancing, and it's RTF.  Finally.
> >  
> > http://www.rcuniverse.com/forum/fb.asp?m=2670617
> >
> >
> > Bob Pastorello
> > NSRCA 199  AMA 46373
> > rcaerobob at cox.net
> > www.rcaerobats.net
> >  
> >  
> 
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.