ABBRA

[Grow Pattern]

Can you send me digital pictures by any chance.? eric.henderson at comcast.net
  ----- Original Message ----- 
  From: vicenterc at comcast.net 
  To: discussion at nsrca.org ; discussion at nsrca.org 
  Cc: rcaerobob at cox.net 
  Sent: Wednesday, February 16, 2005 2:00 PM
  Subject: Re: Re: ABBRA


  Bob,

  Yes, I got two ABBRAS last week.  One is for a friend and he will use gas engine.  I am starting to put both together.  I will install OS 160 in mine.  The quality is superb.  Very light.

  Vince Bortone



    -------------- Original message -------------- 

    > Eric, Vicente Bortone, and Jim Woodward both have them; probably others. 
    > > 
    > > From: "Grow Pattern" 
    > > Date: 2005/02/16 Wed AM 10:59:20 EST 
    > > To: 
    > > Subject: Re: ABBRA 
    > > 
    > > Anyone working on one of these??? 
    > > ----- Original Message ----- 
    > > From: Grow Pattern 
    > > To: discussion at nsrca.org 
    > > Sent: Wednesday, February 16, 2005 10:56 AM 
    > > Subject: Re: ABBRA 
    > > 
    > > 
    > > Info... 
    > > 
    > > The ABBRA is a world class fully molded composite wide body 2M Pattern/F3A 
    > airplane available either for IC engine or electric motor. All high quality 
    > parts are made in negative moulds and prepainted with two component acrylic 
    > paint. 
    > > The fuselage features unique glass - balsa - glass, carbon fiber sandwich 
    > which is very light and strong. No internal formers required. Fixed landing gear 
    > plate and rudder post are installed. Access to the equipment compartment is thru 
    > removable belly pan. 
    > > 
    > > The hollow molded two piece wing and stab feature carbon fiber tubes and 
    > live top hinged ailerons and elevators. All incidences are set in factory during 
    > manufacturing process. 
    > > 
    > > Due to exceptional light weight airframe, using gas engine for power is now 
    > possible. 
    > > 
    > > Wing span 74.80" 
    > > 
    > > Wing area 975 sq in 
    > > 
    > > Length 78.35" 
    > > 
    > > Weight 9.70 lb glow 10.80 lb gas 
    > > 
    > > Recommended engines: ZDZ40RE or any current 2C - 4C glow 1.40 - 1.60 cu in, 
    > new generation of electric out runners, KRAL or AXI. 
    > > 
    > > 
    > 
    > Bob Pastorello, El Reno, OK, USA 
    > rcaerobob at cox.net 
    > www.rcaerobats.net 
    > 
    > ================================================= 
    > To access the email archives for this list, go to 
    > http://lists.f3a.us/pipermail/nsrca-discussion/ 
    > To be removed from this list, go to http://www.nsrca.org/discussionA.htm 
    > and follow the instructions. 
    > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050216/abaf1219/attachment.html