[SPAM] Re: ABBRA

[Bill Glaze]

Eric:
Any idea about cost?  Bill Glaze

Grow Pattern wrote:

> Tried to post a picture but it is too big.
>  
> Try this site  http://www.escomposites.com/abbra.htm
>
>     ----- Original Message -----
>     From: Grow Pattern <mailto:pattern4u at comcast.net>
>     To: discussion at nsrca.org <mailto:discussion at nsrca.org>
>     Sent: Wednesday, February 16, 2005 10:59 AM
>     Subject: Re: ABBRA
>
>     Anyone working on one of these???
>
>         ----- Original Message -----
>         From: Grow Pattern <mailto:pattern4u at comcast.net>
>         To: discussion at nsrca.org <mailto:discussion at nsrca.org>
>         Sent: Wednesday, February 16, 2005 10:56 AM
>         Subject: Re: ABBRA
>
>         Info...
>          
>         The ABBRA is a world class fully molded composite wide body 2M
>         Pattern/F3A airplane available either for IC engine or
>         electric motor. All high quality parts are made in negative
>         moulds and prepainted  with two component acrylic paint. 
>
>         The fuselage features unique glass - balsa - glass, carbon
>         fiber sandwich  which is very light and strong. No internal
>         formers required. Fixed landing gear plate and rudder post are
>         installed. Access to the equipment compartment is thru
>         removable belly pan.
>
>         The hollow molded two piece wing and stab feature carbon fiber
>         tubes and live top hinged ailerons and elevators. All
>         incidences are set in factory during manufacturing process.
>
>         Due to exceptional light weight airframe, using gas engine for
>         power is now possible.
>
>         Wing span        74.80"
>
>         Wing area      975 sq in
>
>         Length              78.35"
>
>         Weight                 9.70 lb glow  10.80 lb gas
>
>         Recommended engines: ZDZ40RE or any current 2C - 4C glow 1.40
>         - 1.60 cu in, new       generation of electric out runners,
>         KRAL or AXI.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050216/2d25733c/attachment.html