ABBRA

[Bill Southwell]

Hummmmmmmmmmm :>)

  _____  

From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Grow Pattern
Sent: Wednesday, February 16, 2005 9:57 AM
To: discussion at nsrca.org
Subject: Re: ABBRA

 

Info...

 

The ABBRA is a world class fully molded composite wide body 2M Pattern/F3A
airplane available either for IC engine or electric motor. All high quality
parts are made in negative moulds and prepainted  with two component acrylic
paint. 

The fuselage features unique glass - balsa - glass, carbon fiber sandwich
which is very light and strong. No internal formers required. Fixed landing
gear plate and rudder post are installed. Access to the equipment
compartment is thru removable belly pan.

The hollow molded two piece wing and stab feature carbon fiber tubes and
live top hinged ailerons and elevators. All incidences are set in factory
during manufacturing process.

Due to exceptional light weight airframe, using gas engine for power is now
possible.

Wing span        74.80"

Wing area      975 sq in

Length              78.35"

Weight                 9.70 lb glow  10.80 lb gas

Recommended engines: ZDZ40RE or any current 2C - 4C glow 1.40 - 1.60 cu in,
new       generation of electric out runners, KRAL or AXI.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050216/038d8ab0/attachment-0001.html