Opinions Needed

Ed Alt ed_alt at hotmail.com
Sat Feb 12 16:28:17 AKST 2005


I'll put something up later on RCUniverse
  ----- Original Message ----- 
  From: William C. Harden 
  To: discussion at nsrca.org 
  Sent: Saturday, February 12, 2005 7:22 PM
  Subject: RE: Opinions Needed


  I'm interested, show me the pics.

   

  Bill

   

  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On Behalf Of Ed Alt
  Sent: Saturday, February 12, 2005 5:33 PM
  To: discussion at nsrca.org
  Subject: Re: Opinions Needed

   

  Bob:

  Should work fine.  I've been using an O-ring mounting method since seeing this on Ron Lockhart and Rick Wallace's Focus's.  It winds up being similar to what you have inasmuch as it allows plenty of give in all required axis, but definitely doesnt let things flop around.  Light & cheap too.  

   

  Basically, the pipe is just captured with 2 - 3 O-rings slung between whatever you want to use to pull them taught along either side of the pipe in 2 - 3 separate locations along its length.  On a Focus, it's real easy, since you just loop the O-ring under the screw heads that hold the pipe belly pan to the fuselage.  The only other thing needed is something to prevent the pipe from slipping aft.  I think Rick made some kind of collar around the inlet area for it to grab.  Depends on the pipe location, you can also suspend the last one in the back by twisting around the exhaust exit and accomplish the same thing.   I have pics of the Focus II if anyone is interested.

   

  Ed

    ----- Original Message ----- 

    From: Bob Pastorello 

    To: NSRCA 

    Sent: Saturday, February 12, 2005 5:21 PM

    Subject: Opinions Needed

     

    In typical "MacGyver"-ish fashion I *think* I've addressed this pipe mounting challenge on the Icepoint.

    Your opinions - thoughts - should I even try this, or has someone already BTDT and learned something?

    Feedback welcomed, please!

     

    http://www.rcuniverse.com/forum/fb.asp?m=2650079


    Bob Pastorello
    NSRCA 199  AMA 46373
    rcaerobob at cox.net
    www.rcaerobats.net

     

     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050213/3c5dc38f/attachment.html


More information about the NSRCA-discussion mailing list