Excelleron RTF weight?

[Terry Terrenoire]

Nat: our calculating equip seems to agree. Last night I did the
measurements and came out with the same loading, 22.4oz/sq ft.
Should fly just fine at that loading! I also checked the CG. I am about 7
1/2 inches back from the wing LE. The instructions suggest 7". Do you
remember where your CG is? Have you made any changes in it since flying?

Terry T.


On Mon, 31 Jan 2005 20:58:15 -0600 "Bob Pastorello" <rcaerobob at cox.net>
writes:
Terry, you'll be about 22.4 or so.... at 9.25, mine is 24.1  (all info on
my website).  It's 6.1 sq ft area.

Bob Pastorello
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


----- Original Message ----- 
From: Terry Terrenoire 
To: discussion at nsrca.org 
Cc: discussion at nsrca.org 
Sent: Monday, January 31, 2005 7:03 PM
Subject: Re: Excelleron RTF weight?


Bob: I have not calculated the wing loading yet. Will take some
measurements tonight and do that! Thanks for the info.

Terry T.


On Mon, 31 Jan 2005 18:01:24 -0600 "Bob Pastorello" <rcaerobob at cox.net>
writes:
DIdn't see other replies, Terry, but I think you're right on....mine,
with the ST2300 is 9.2, so you're in good shape.  Fortunately, it has
LOTS of wing....

Bob Pastorello
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


----- Original Message ----- 
From: Terry Terrenoire 
To: discussion at nsrca.org 
Sent: Monday, January 31, 2005 5:47 AM
Subject: Excelleron RTF weight?


I have just finished my Excelleron. I have a YS 91 in the nose and used
all the hardware and construction proceedures recommended in the
instruction manual. Final all up weight, less fuel, is 8# 5oz. How does
that compare to what you guys have been finding?

Terry T.
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050201/613e5457/attachment.html