[NSRCA-discussion] Nose Ring

[Tomc at buyrc.com]

I used the new silver one and had to remove the hub to get it to slide on.
It's very tight, but I think works better than the looser one.

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
jivey61 at bellsouth.net
Sent: Wednesday, December 21, 2005 1:25 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Nose Ring

 

Dave

 Either one will work.I would prefer a little loose.The gold nose ring isn't
available any more. That is reason to sell the new solid alum. version.
Actually I run a Webra 145 with no nose ring The AR mount is stiff enough to
do this with a 2 S.

 

Jim Ivey

----- Original Message ----- 

From: Dave <mailto:davidsmith at ns.sympatico.ca>  Smith 

To: nsrca-discussion at lists.nsrca.org 

Sent: Wednesday, December 21, 2005 3:06 PM

Subject: [NSRCA-discussion] Nose Ring

 

I think I sent the following to the wrong address. If so,my apologies.

 

I have a Central Hobbies nose ring (the one that is silver coloured and
tapped for mounting bolts).

It fits my OS 140 tightly.

 

I also have the older gold coloured nose ring that has a very slight amount
of clearance between it and the engine crankcase

Engine mount is a Hyde AR.

 

I don't think the tight nose ring is the way to go,but I might be wrong.

Anyone use this tight ring?   Opinions please.

 

Thanks,,,,,,Dave


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051222/bcff34e1/attachment.html