[NSRCA-discussion] El Nino canopy

[Ken Thompson]

Sounds like a lot of work Scott.  That process is something I've never done before.

Ken
  ----- Original Message ----- 
  From: Scott Anderson 
  To: NSRCA Mailing List 
  Sent: Monday, December 19, 2005 8:14 PM
  Subject: Re: [NSRCA-discussion] El Nino canopy


  Hmm, sounds like a good time to make a plug and mold and make a glass one 

  scott 
  D3 AVP
    ----- Original Message ----- 
    From: Ken Thompson 
    To: NSRCA-discussion at lists.nsrca.org 
    Sent: Monday, December 19, 2005 7:50 PM
    Subject: [NSRCA-discussion] El Nino canopy


    I just came home with my new El Nino Saturday.  Today I had the canopy off and was nosing around the inside checking out the setup.

    I leaned over the bench and heard a crack, I had just leaned on the canopy and put a 4 inch crack in it, lengthways on the top.  

    The question I have is, is there a good way to repair it, without using thin CA, because of the fogging that CA will cause?

    Or does anybody have a canopy that they would be willing to part with?

    TIA,

    Ken


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051220/c3df00d1/attachment.html