New "wing" on pattern plane

[Lance Van Nostrand]

Good idea.  I could PFM a servo to the valve, slaved to elevator.  
  ----- Original Message ----- 
  From: Derek Koopowitz 
  To: discussion at nsrca.org 
  Sent: Monday, December 05, 2005 10:05 PM
  Subject: RE: New "wing" on pattern plane


  The steam release valve could be used to direct air in a different slipstream in order to help facilitate lift (or yaw).



------------------------------------------------------------------------------
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On Behalf Of Lance Van Nostrand
  Sent: Monday, December 05, 2005 11:16 AM
  To: discussion at nsrca.org
  Subject: Re: New "wing" on pattern plane


  Derek,
  The only spare lid I can find has a steam release valve.  I'm worried that could negatively affect the airflow.  Can you tell me where I can get that exact lid?
  --Lance
    ----- Original Message ----- 
    From: Derek Koopowitz 
    To: discussion at nsrca.org 
    Sent: Monday, December 05, 2005 1:00 PM
    Subject: New "wing" on pattern plane


    In case you don't have time to fashion up a new "wing" for your plane - ala Christophe's "wing" that he sported at the WC in September... just grab a lid from your pot and clamp it to a piece of wood and then tape it to the fuselage... pic attached.

    -Derek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051207/3efea413/attachment.html