Pump

[George Miller]

It really looks like a bad "uniflow set up to me, too.

I tried uniflow and didn't like it.
G
  ----- Original Message ----- 
  From: Ken Thompson 
  To: discussion at nsrca.org 
  Sent: Monday, December 05, 2005 5:46 PM
  Subject: Re: Pump


  Jay,

  That system, that OS recommends, reminds me a little of he Uniflow tank system. What Perry are you using?

    ----- Original Message ----- 
    From: Jay Marshall 
    To: discussion at nsrca.org 
    Sent: Monday, December 05, 2005 6:15 PM
    Subject: RE: Pump


    There are two nipples on the exhaust. One goes to the tank and the other to the backplate on the engine. O.S. has recommended a configuration for the tank that is totally unreasonable for an inverted engine - all the fuel will siphon out to the silencer when not running because it is below the tank. Regardless, I don't believe there will be enough fuel tank pressure to manage a tank over the wing. The plan now is to test run the engine with the tank pressurized then pinch of the pressure line and see it if still performs (on the ground).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051206/14753250/attachment.html