9Z lithium Battery

[Dave Harmon]

Tom
. I just remembered that they sent the dead parts back to me so I
dug them out of the pile and looked at the battery.
The battery is held vertical when installed by 2 legs that are soldered
onto the ckt board.
The mfgr is Panasonic.
Regards

Dave Harmon
NSRCA 586
K6XYZ[at]valornet[dot]com
Broken Arrow, Ok. 
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Koenig, Tom
Sent: Monday, August 22, 2005 10:44 PM
To: discussion at nsrca.org
Subject: RE: 9Z lithium Battery

Thanks for the tip Verne...is it the vertical or flat version?
 
Sounds like you and I  share the same 'fear' factor!!!
 
Thanks
 
Tom
-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Verne Koester
Sent: Tuesday, 23 August 2005 1:13 PM
To: discussion at nsrca.org
Subject: Re: 9Z lithium Battery
Tom,
The CR2032 comes in a couple of different versions. You'll need the one
that has solder legs attached since it's soldered directly to the board.
You'll also need to know that you'll have your radio just about
completely gutted to get to it. There's a board immediately in front of
the LCD screen that's actually folded in half and connected together by
a ribbon connector. That's where the battery is located. Hope this
helps. BTW, I'm not a radio technician, just ignorantly fearless....
 
Verne
 
 
----- Original Message ----- 
From: Dave Harmon 
To: discussion at nsrca.org 
Sent: Monday, August 22, 2005 10:37 PM
Subject: RE: 9Z lithium Battery

Hi Tom
.

I just had some work done to my ZAP last month
.
The lithium battery was one of the things replaced.
It is a CR2032.
This info is right off the repair invoice.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]valornet[dot]com
Broken Arrow, Ok. 


To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.