Gear vs Aux 3

[Pat Hewitt]

I guess I was clear I want to mix my rudder and gear ports togeather because
the new JR 770S does not have a aus3.

thanks

Pat H.

------ Original Message ------
Received: 04:10 PM CDT, 04/23/2005
From: "Ed  Alt" <ed_alt at hotmail.com>
To: <discussion at nsrca.org>
Subject: Re: Gear vs Aux 3

Pat:
What were you using Aux 3 for or better yet, what is it that you're trying 
to do now?

Ed
----- Original Message ----- 
From: "Pat Hewitt" <phewitt at farmersagent.com>
To: <discussion at nsrca.org>
Sent: Saturday, April 23, 2005 5:07 PM
Subject: Gear vs Aux 3


I need some help from you 10X users. I just replaced my JR 950 receiver with 
a
770 to make weight for my ABBRA and by the way we have made weight. My
question is as you all know the 10 channel 950 has the aux3 but the 770 does
not it just has aux1, aux2, and gear so how do I use the gear in place of
aux3.

Thanks

Pat Hewitt
Paola, Ks.



================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.





To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.