1/4 - 20 tap

Mark Hunt flyintexan at houston.rr.com
Thu Sep 23 17:22:57 AKDT 2004


for wood you can get away with 3/16" drill.

real size (metal working) is approx. 0.200" diameter drill.

hope this helps
  ----- Original Message ----- 
  From: Jerry Wilson 
  To: discussion at nsrca.org 
  Sent: Thursday, September 23, 2004 8:12 PM
  Subject: 1/4 - 20 tap


  Can someone let me know what size drill bit to use for this tap for wing bolts in ¼" ply?

   

  Thanks,

  Jerry

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040923/be7370cf/attachment.html


More information about the NSRCA-discussion mailing list